Bending Fatigue Life Prediction Model of Carburized Gear Based on Microcosmic Fatigue Failure Mechanism

被引：12

作者：

Deng, Hailong ^{[1
,2
]}

Guo, Yang ^{[1
,2
]}

Liu, Hang ^{[1
,2
]}

Liu, Qichen ^{[1
,2
]}

Guo, Yupeng ^{[1
,2
]}

Yu, Huan ^{[1
,2
]}

机构：

[1] Inner Mongolia Univ Technol, Coll Mech Engn, Hohhot 010051, Peoples R China

[2] Inner Mongolia Key Lab Adv Mfg Technol, Hohhot 010051, Peoples R China

来源：

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2022年 / 31卷 / 02期

关键词：

carburized gear steel; crack initiation; crack propagation; life prediction; residual stress; CRACK-INITIATION; RESIDUAL-STRESS; HIGH-CYCLE; COMPUTATIONAL MODEL; PROPAGATION; STRENGTH; TEETH; TOOTH;

D O I：

10.1007/s11665-021-06236-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Bending fatigue tests of carburized gear in high cycle fatigue life regime were performed under stress ratio of 0.04. All the crack sources of the broken teeth are originated from the stress concentration on the surface of teeth root. By considering the effects of surface residual stress, notch effect, stress gradient and crack size, the predicted initiation life model of carburized gear is established by dislocation energy method. Meanwhile, based on the Paris Equation, the crack length a corresponding to fracture toughness and real crack propagation path, the predicted growth life model of carburized gear can be established. Finally, based on the behaviors of crack initiation and propagation, the whole life prediction model of carburized gear can be constructed, and the prediction accuracy of the model is within three times of the test life, which can be used to predict the bending fatigue life of carburized gear.

引用

页码：882 / 894

页数：13

共 43 条

[11] Effect of crack closure on gear crack propagation [J].

Guagliano, M ;

Vergani, L .

INTERNATIONAL JOURNAL OF FATIGUE, 2001, 23 (01) :65-73

[12] Fatigue limits prediction of surface treated materials [J].

Guechichi, H ;

Castex, L .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (03) :381-387

[13] Effect of Shot Peening on Residual Stress Distribution and Microstructure Evolution of Artificially Defected 50CrV4 Steel [J].

Irizalp, Simge Gencalp ;

Saklakoglu, Nursen ;

Baris, Fatih ;

Kayral, Selda .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (11) :7607-7616

[14] EVALUATION OF THE STRENGTH OF CARBURIZED SPUR GEAR TEETH BASED ON FRACTURE-MECHANICS [J].

KATO, M ;

DENG, G ;

INOUE, K ;

TAKATSU, N .

JSME INTERNATIONAL JOURNAL SERIES C-DYNAMICS CONTROL ROBOTICS DESIGN AND MANUFACTURING, 1993, 36 (02) :233-240

[15] Influence of indenter geometry on half-plane with edge crack subjected to fretting condition [J].

Kim, HK ;

Lee, SB .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 2001, 36 (02) :125-139

[16] Computational model for the analysis of bending fatigue in gears [J].

Kramberger, J ;

Sraml, M ;

Glodez, S ;

Flasker, J ;

Potrc, I .

COMPUTERS & STRUCTURES, 2004, 82 (23-26) :2261-2269

[17] Rim thickness effects on gear crack propagation life [J].

Lewicki, DG ;

Ballarini, R .

INTERNATIONAL JOURNAL OF FRACTURE, 1997, 87 (01) :59-86

[18] Modeling the Effect of Carburization and Quenching on the Development of Residual Stresses and Bending Fatigue Resistance of Steel Gears [J].

Li, Zhichao ;

Freborg, Andrew M. ;

Hansen, Bruce D. ;

Srivatsan, T. S. .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (03) :664-672

[19] Specific features of high-cycle and ultra-high-cycle fatigue [J].

Lukás, P ;

Kunz, L .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2002, 25 (8-9) :747-753

[20]

Mughrabi H, 1999, FATIGUE FRACT ENG M, V22, P633, DOI 10.1046/j.1460-2695.1999.00186.x

← 1 2 3 4 5 →