Microstructure and Mechanical Properties of TiB-Containing Al-Zn Binary Alloys

被引：33

作者：

Shin, Sang-Soo ^{[1
]}

Yeom, Gil-Yong ^{[2
]}

Kwak, Tae-Yang ^{[2
]}

Park, Ik-Min ^{[1
]}

机构：

[1] Pusan Natl Univ, Dept Mat Sci & Engn, Busan 609735, South Korea

[2] Korea Inst Ind Technol, Liquid Proc & Casting Technol R&BD Grp, Inchon 21999, South Korea

来源：

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2016年 / 32卷 / 07期

关键词：

Al-Zn(Cu) alloy; Eutectic structure; High strength; TiB2; GRAIN-REFINEMENT; HETEROGENEOUS NUCLEATION; WEAR PROPERTIES; SLIDING WEAR; COOLING RATE; ALUMINUM; CAST; BEHAVIOR; ELEMENTS;

D O I：

10.1016/j.jmst.2016.04.016

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructure and mechanical properties of newly developed Al-35Zn cast alloys with TiB refiner addition were evaluated by X-ray diffractometry, optical microscopy, and scanning electron microscopy coupled with energy dispersive spectrometry. The microstructure of these alloys featured alpha-Al dendrites surrounded by Al-Zn (alpha + eta) eutectic structures. After the addition of TiB refiner, the alloy grain sizes decreased, and its morphology abruptly changed from dendritic to equiaxed grains. Such an improved microstructure of the modified alloys was accompanied by a significant increase in the tensile strength and elongation percentage compared to those of the Al-Zn or Zn-Al-based alloys. The results showed that with the increase of TiB content up to 0.05%, the morphology of alpha-Al dendrites and alpha + eta phases changed from coarse dendrite and lamellar structures into independent and fine ones. Based on these results, the effect of TiB refiner addition on the microstructure and mechanical properties of the Al-35Zn binary alloys was investigated. Copyright (C) 2016, The editorial office of Journal of Materials Science & Technology. Published by Elsevier Limited.

引用

页码：653 / 659

页数：7

共 43 条

[1] Mechanical and tribological properties of Al-40Zn-Cu alloys [J].

Alemdag, Yasin ;

Savaskan, Temel .

TRIBOLOGY INTERNATIONAL, 2009, 42 (01) :176-182

[2]

[Anonymous], ASTM B86 09 STAND SP

[3]

[Anonymous], LIGHT MET

[4]

*ASM INT, 1990, MET HDB, V2

[5] On the mechanism of grain refinement in Al-Zr-Ti alloys [J].

Atamanenko, T. V. ;

Eskin, D. G. ;

Sluiter, M. ;

Katgerman, L. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (01) :57-60

[6] Criteria of Grain Refinement Induced by Ultrasonic Melt Treatment of Aluminum Alloys Containing Zr and Ti [J].

Atamanenko, T. V. ;

Eskin, D. G. ;

Zhang, L. ;

Katgerman, L. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (08) :2056-2066

[7] The effect of Ni and V trace elements on the mechanical properties of A356 aluminium foundry alloy in as-cast and T6 heat treated conditions [J].

Casari, Daniele ;

Ludwig, Thomas H. ;

Merlin, Mattia ;

Arnberg, Lars ;

Garagnani, Gian Luca .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 610 :414-426

[8]

Closset B., 1982, AFS Transactions, V31, P453

[9]

Davis J., 1992, ASM HDB, V3

[10] Mechanical properties in the semi-solid state and hot tearing of aluminium alloys [J].

Eskin, DG ;

Suyitno ;

Katgerman, L .

PROGRESS IN MATERIALS SCIENCE, 2004, 49 (05) :629-711

← 1 2 3 4 5 →