Nanocomposites of Barium Titanate Nanoparticles Embedded in Thermosetting Polymer Matrices (Novolac Resin/Unsaturated Polyesters/Epoxy Resin): A Comparative Study

Polymer matrix nanocomposites with embedded ferroelectric barium titanate particles were developed and characterized. The utility of such nanocomposites is the energy storage capability that they exhibit, besides their low weight and cost, in comparison to materials that are customarily used for this purpose. The polymers that have been used as matrices in the composites belong to the three most usable thermosetting polymer resins (novolacs, unsaturated polyesters, and epoxy resins), were either laboratory synthesized or commercially supplied. Structure and morphology of the produced composite specimens were studied via Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), and Fourier Transformation Infrared Spectroscopy (FTIR). Thermal, mechanical and electrical performance was examined via Differential Scanning Calorimetry (DSC), bending and shear strength tests (three-point method), and Broadband Dielectric Spectroscopy (BDS), respectively. Mechanical shear and bending strength values were determined, as well as mechanical failure mode (brittle or elastomer) were estimated. Dielectric measurements disclosed the presence of four relaxation processes (alpha -mode, beta -mode, and gamma -mode) and Interfacial Polarization between the system's constituents. The comparative study ended with the calculation of energy density, so that the energy storing capability could be estimated.