Bandwidth-Enhanced EBG Structure for Power Noise Suppression in 60 GHz RF SiP

被引：0
|
作者：
Wang, Chuen-De [1 ]
Wu, Tzong-Lin [1 ]
机构：
[1] Natl Taiwan Univ, Dept Elect Engn, Taipei 10617, Taiwan
来源：
2011 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC) | 2011年
关键词：
HIGH-SPEED CIRCUITS; CRYSTAL POWER/GROUND LAYER; GROUND BOUNCE NOISE; SWITCHING NOISE; BAND SUPPRESSION; PLANES; DESIGN;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A novel electromagnetic bandgap (EBG) structure is proposed to mitigate power noise in the power distribution network of RF SiP. In order to enhance the bandwidth of the suppression stopband, the proposed EBG structure is implemented by employing multi-layer printed circuit board and multiple power/ground via pairs with narrow pitch. The design concepts for the enhancement of the lower/upper bound cutoff frequency are investigated in this paper. Test boards are fabricated and measured to validate the accuracy of the design concepts. The measured results show good consistency with simulated ones. To demonstrate the influence of the power noise on RF SiP, a simulation environment including a 60 GHz power amplifier and power distribution network on the package level is established. Besides, the proposed EBG power/ground plane is employed to suppress the power noise and intermodulation distortion of the RF output spectrum.
引用
收藏
页码：715 / 719
页数：5
相关论文
共 50 条
  • [1] Miniaturized and Bandwidth-Enhanced Multilayer 1-D EBG Structure for Power Noise Suppression
    Shen, Chi-Kai
    Wu, Tzong-Lin
    Chen, Chung-Hao
    Han, Dong-Ho
    2014 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2014, : 357 - 361
  • [2] Modeling and Analysis of Bandwidth-Enhanced Multilayer 1-D EBG with Bandgap Aggregation for Power Noise Suppression
    Department of Electrical of Engineering, Graduate Institute of Communication Engineering, National Taiwan University, Taipei
    10617, Taiwan
    不详
    OR
    97124, United States
    IEEE Trans Electromagn Compat, 4 (858-867):
  • [3] Modeling and Analysis of Bandwidth-Enhanced Multilayer 1-D EBG With Bandgap Aggregation for Power Noise Suppression
    Shen, Chi-Kai
    Chen, Chung-Hao
    Han, Dong-Ho
    Wu, Tzong-Lin
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2015, 57 (04) : 858 - 867
  • [4] A design of 60-GHz bandwidth-enhanced comb-line array
    Kim, Jihoon
    Kim, Kangwook
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2020, 62 (10) : 3292 - 3300
  • [5] A Low-profile Dual-polarized Antenna with Bandwidth-enhanced EBG Structure
    Xiong, Huan Qian
    Xie, Feng
    Tong, Mei Song
    2019 PHOTONICS & ELECTROMAGNETICS RESEARCH SYMPOSIUM - FALL (PIERS - FALL), 2019, : 229 - 232
  • [6] Wearable textile EBG-inspired bandwidth-enhanced patch antenna
    Pinapati, Sree Pramod
    Brittain, Joshua
    Caldow, Adrian
    Fumeaux, Christophe
    IET MICROWAVES ANTENNAS & PROPAGATION, 2020, 14 (15) : 2011 - 2019
  • [7] EBG-enhanced split power planes for wideband noise suppression
    Wang, CL
    Shiue, GH
    Wu, RB
    ELECTRICAL PERFORMANCE OF ELECTRONIC PACKAGING, 2004, : 61 - 64
  • [8] A Bandwidth-Enhanced Sub-GHz Wristwatch Antenna Using an Optimized Feed Structure
    Kumar, Sanjeev
    Newberry, Robert
    Hannon, Tim
    Barton, John
    Rodencal, Matthew
    Pigeon, Melusine
    Scanlon, William G.
    O'Flynn, Brendan
    Buckley, John L.
    IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2021, 20 (08): : 1389 - 1393
  • [9] Model and Mechanism of Miniaturized and Stopband-Enhanced Interleaved EBG Structure for Power/Ground Noise Suppression
    Wang, Chuen-De
    Wu, Tzong-Lin
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2013, 55 (01) : 159 - 167
  • [10] A low frequency hybrid EBG structure for power plane noise suppression
    McKinzie, Will
    Electrical Performance of Electronic Packaging, 2006, : 51 - 54
12345