Shear Stress and Deformation Analysis of Static Bonded Multi-layer of Pyrex7740 Glass and Aluminum

被引：0

作者：

Liu, Cuirong ^{[1
]}

Jia, Tuosheng ^{[1
]}

Meng, Qingsen ^{[1
]}

机构：

[1] Taiyuan Univ Sci & Technol, Dept Mat Sci & Engn, Taiyuan 030024, Peoples R China

来源：

ADVANCES IN ROLLING EQUIPMENT AND TECHNOLOGIES | 2011年 / 145卷

关键词：

Static bonding; Aluminum; Pyrex glass; Finite element; Shear stress;

D O I：

10.4028/www.scientific.net/AMR.145.361

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper the technological experiments of static bonding has been carried out in the bonding of multi-layer Pyrex7740 Glass and Al. The joining mechanism is analyzed with SEM and EDX. It's observed that bonding region across the interface consists of the metal layer, oxide transitional layer and the glass layer. The bonding process can mainly be categorized into anodic process and solid state diffusing process. The pile-up of the ions and its drift in the interface area are the main reasons for anode oxidation and joining successfully. The analysis of the shear stress and deformation in the static bonded samples was made by MARC. Modeling studies showed the maximum shear stress of bonded samples all occur in the transition layer. It also shows the shear stress and deformation in the three-layer samples is significantly smaller than that in the two-layer samples. This has an important advantage in MEMS fabrication.

引用

页码：361 / 364

页数：4

共 50 条

[31] Elastic-plastic deformation analysis of multi-layer surface coating under sliding contact
Pan, XX
Yan, L
Xu, JJ
THIN SOLID FILMS, 1999, 354 (1-2) : 154 - 161
[32] Optical parametric amplification of mid-infrared radiation using multi-layer glass-bonded QPM GaAs crystals
Perrett, Brian J.
Mason, Paul D.
Webber, Pamela A.
Woods, Simon C.
Orchard, David A.
NONLINEAR FREQUENCY GENERATION AND CONVERSION: MATERIALS, DEVICES, AND APPLICATIONS VI, 2007, 6455
[33] Effect of welding sequence on stress and deformation field of Invar alloy multi-layer and multi-pass welding: A simulation study
Gao, Qiyu
Zhan, Xiaohong
Shen, Honglie
Ling, Wanli
Bu, Hengchang
MODERN PHYSICS LETTERS B, 2020, 34 (13):
[34] Ultrasonic echo signal analysis of multi-layer adhesive bonded structure based on wavelet-packet transform
Dun Yi
Wang Feng
Shi Xiao-hong
Xu Zhang-sui
ISTM/2007: 7TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-7, CONFERENCE PROCEEDINGS, 2007, : 716 - 719
[35] Multi-Layer Spectral Analysis for Tensor Structure Encoding of 4D Deformation Field Data
Iliopoulos, A. S.
Zhang, Y.
Pitsianis, N.
Sun, X.
Yin, F. F.
Ren, L.
MEDICAL PHYSICS, 2015, 42 (06) : 3669 - 3670
[36] Critical design factors for multi-layer coating systems that influence heat partition in the secondary shear deformation zone and machining performance
Fahad, Muhammad
Mativenga, Paul T.
Sheikh, Mohammad A.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2012, 226 (B6) : 1071 - 1085
[37] Comprehensive analysis of multi-layer friction surfacing of 7075 aluminum alloy: manufacturing, microstructure, and mechanical properties
Javier Vivas
Marcelo Roldán
Mariane Chludzinski
Evgeny Modin
Andrey Chuvilin
Oier Zubiri
Maria del Carmen Taboada
Egoitz Aldanondo
The International Journal of Advanced Manufacturing Technology, 2025, 137 (11) : 6153 - 6168
[38] Thermal stress analysis of multi-layer thin films and coatings by an advanced boundary element method
Chen, XL
Liu, YJ
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2001, 2 (03): : 337 - 349
[39] FEM analysis of stress distribution in metal/ceramic multi-layer composites prepared by EBPVD technique
Ctr. for Compos. Mat. and Structures, Harbin Institute of Technology, Harbin, 150001, China
Society for the Advancement of Material and Process Engineering,, 1600, 3985-3993 (2004):
[40] Finite element (FE) analysis of thermal stress in production process of multi-layer lining ladle
Fang, Linfang
Su, Fuyong
Kang, Zhen
Zhu, Haojun
CASE STUDIES IN THERMAL ENGINEERING, 2024, 57

← 1 2 3 4 5 →