Comparitive analysis of mechanical properties of FDM printed parts based on raster angles

被引：19

作者：

Mohan, Ranjith Gopi ^{[1
]}

Santhosh, Kiran ^{[1
]}

Iyer, Rahul V. ^{[1
]}

John, Lovin K. ^{[1
]}

Ramu, M. ^{[1
]}

机构：

[1] Amrita Vishwa Vidyapeetham, Dept Mech Engn, Amrita Sch Engn, Coimbatore, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 47卷

关键词：

FDM; PLA; Raster angle; Mechanical properties;

D O I：

10.1016/j.matpr.2021.05.649

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Additive manufacturing is a promising technology which finds varied applications in industry. Fused Deposition modelling technique has improved the range of application of AM as it utilizes layer by layer deposition to manufacture faster prototypes of different dimensions and geometries. Studies have focussed on the mechanical behaviour, especially the tensile strength of printed parts and how it is been influenced by various manufacture and process parameters. This work focusses on studies on the influence of raster patterns and presents a comparative study of mechanical properties other than the commonly inferred tensile strength, namely, flexural, compressive and impact strength of FDM printed PLA parts printed in two most commonly employed raster orientations, +45(0)/-45(0) and 0(0)/90(0). (C) 2021 Elsevier Ltd. All rights reserved.

引用

页码：4730 / 4734

页数：5

共 10 条

[1] Polymer additive manufacturing of ABS structure: Influence of printing direction on mechanical properties [J].

Dana, H. Ramezani ;

Barbe, F. ;

Delbreilh, L. ;

Ben Azzouna, M. ;

Guillet, A. ;

Breteau, T. .

JOURNAL OF MANUFACTURING PROCESSES, 2019, 44 :288-298

[2] Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques [J].

Dawoud, Michael ;

Taha, Iman ;

Ebeid, Samy J. .

JOURNAL OF MANUFACTURING PROCESSES, 2016, 21 :39-45

[3] O Mechanical characterization of 3D-printed polymers [J].

Dizon, John Ryan C. ;

Espera, Alejandro H., Jr. ;

Chen, Qiyi ;

Advincula, Rigoberto C. .

ADDITIVE MANUFACTURING, 2018, 20 :44-67

[4]

Ebel E., 2014, RTejournal, V2014

[5]

Letcher Todd, 2014, P ASME INT MECH ENG, V2A

[6] The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties [J].

Li, Hongbin ;

Wang, Taiyong ;

Sun, Jian ;

Yu, Zhiqiang .

RAPID PROTOTYPING JOURNAL, 2018, 24 (01) :80-92

[7] Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method [J].

Liu, Xinhua ;

Zhang, Mingshan ;

Li, Shengpeng ;

Si, Lei ;

Peng, Junquan ;

Hu, Yuan .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 89 (5-8) :2387-2397

[8] Direct 3D printing of polymers onto textiles: experimental studies and applications [J].

Pei, Eujin ;

Shen, Jinsong ;

Watling, Jennifer .

RAPID PROTOTYPING JOURNAL, 2015, 21 (05) :556-571

[9] Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives [J].

Torres, Jonathan ;

Cotelo, Jose ;

Karl, Justin ;

Gordon, Ali P. .

JOM, 2015, 67 (05) :1183-1193

[10] Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions [J].

Tymrak, B. M. ;

Kreiger, M. ;

Pearce, J. M. .

MATERIALS & DESIGN, 2014, 58 :242-246

← 1 →