Fatigue life estimations of alclad AA2024-T3 friction stir clinch joints

被引：27
|
作者：
Lin, P. -C. [1 ,2 ]
Lo, S. -M. [2 ]
Wu, S. -P. [2 ]
机构：
[1] Natl Chung Cheng Univ, Adv Inst Mfg High Tech Innovat, Chiayi 62102, Taiwan
[2] Natl Chung Cheng Univ, Dept Mech Engn, Chiayi 62102, Taiwan
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2018年 / 107卷
关键词：
Friction stir clinching; Friction stir spot welding; Fatigue; Aided; Aluminum alloy 2024-T3; LAP-SHEAR SPECIMENS; INTENSITY FACTOR SOLUTIONS; CROSS-TENSION SPECIMENS; FORM STRUCTURAL STRESS; SPOT WELDS; ALUMINUM-ALLOY; FAILURE MODES; GEOMETRIC FUNCTIONS; LOADING CONDITIONS; SHEETS;
D O I：
10.1016/j.ijfatigue.2017.10.011
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Joining aided AA2024-T3 sheets is difficult for conventional welding processes due to ductile surface cladding layers. Friction stir clinching (FSC) was therefore proposed to overcome this problem. Here, two types of specimens, tensile-shear and cross-tension, were made to investigate general fatigue behavior of FSC joints. Critical fatigue cracks and failure modes were identified by photos and micrographs. Interfacial and kinked crack fatigue models consist of local and global stress intensity factors (SIFs) and a Paris law approach were taken for fatigue life estimations. The fatigue life estimations well agreed with the experimental fatigue data. The fatigue data of FSC joints in above specimens were well correlated by effective SIF ranges.
引用
收藏
页码：13 / 26
页数：14
相关论文
共 50 条
  • [21] Influence of rotation speed on mechanical properties and corrosion sensitivity of friction stir welded AA2024-T3 joints
    Li, Na
    Li, Wenya
    Xu, Yaxin
    Yang, Xiawei
    Alexopoulos, Nikolaos D.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2018, 69 (08): : 1016 - 1024
  • [22] Multiple crack growth prediction in AA2024-T3 friction stir welded joints, including manufacturing effects
    Carlone, Pierpaolo
    Citarella, Roberto
    Sonne, Mads R.
    Hattel, Jesper H.
    INTERNATIONAL JOURNAL OF FATIGUE, 2016, 90 : 69 - 77
  • [23] Diminishing residual stress and distortion by in-situ rolling tensioning to increase fatigue performance of friction stir welded AA2024-T3 joints
    Pujono
    Ilman, M. N.
    Kusmono
    Muslih, M. R.
    Priyanto, T. H.
    Apriansyah, R.
    Isnaini, A.
    INTERNATIONAL JOURNAL OF FATIGUE, 2025, 190
  • [24] Effect of friction stir welding on dynamic properties of AA2024-T3 and AA7075-T7351
    Chao, YJ
    Wang, Y
    Miller, KW
    WELDING JOURNAL, 2001, 80 (08) : 196S - 200S
  • [25] Effect of friction stir welding on dynamic properties of AA2024-T3 and AA7075-T7351
    Chao, Y.J.
    Wang, Y.
    Miller, K.W.
    Welding Journal (Miami, Fla), 2001, 80 (08):
  • [26] DISSIMILAR FRICTION STIR WELDING OF AA2024-T3 AND AA7075-T6 ALUMINIUM ALLOYS
    Aldanondo, E.
    da Silva, A. A. M.
    Alvarez, P.
    Lizarralde, A.
    Echeverria, A.
    FRICTION STIR WELDING AND PROCESSING V, 2009, : 295 - 304
  • [27] Effect of ultrasonic vibration on fatigue performance of AA 2024-T3 friction stir weld joints
    Wu, Mingxiao
    Wu, ChuanSong
    Gao, Song
    JOURNAL OF MANUFACTURING PROCESSES, 2017, 29 : 85 - 95
  • [28] Fatigue assessment of refill friction stir spot weld in AA 2024-T3 similar joints
    Brzostek, R. C.
    Suhuddin, U.
    dos Santos, J. F.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (05) : 1208 - 1223
  • [29] Pinless Friction Stir Welding of AA2024-T3 Joint and Its Failure Modes
    李文亚
    李锦锋
    张志函
    高大路
    王卫兵
    栾国红
    Transactions of Tianjin University, 2014, (06) : 439 - 443
  • [30] Characteristics and strength of hybrid friction stir welding and adhesive bonding lap joints for AA2024-T3 aluminium alloy
    Wang, Yue
    Chai, Peng
    Ma, He
    Zhang, Yanhua
    JOURNAL OF ADHESION, 2022, 98 (04): : 325 - 347
12345