Research on Thermal Characteristics of Ball Screw Feed System Considering Nut Movement

被引:10
作者
Liu, Hongliang [1 ]
Rao, Zhaofeng [1 ]
Pang, Ruda [1 ]
Zhang, Yaoman [1 ]
机构
[1] Northeastern Univ, Sch Mech Engn Automat, Shenyang 110819, Peoples R China
关键词
ball screw feed system; moving heat source; thermal characteristic; finite difference method; MACHINE-TOOLS; ERROR; MODEL; COMPENSATION; TEMPERATURE; SIMULATION; ALGORITHM;
D O I
10.3390/machines9110249
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The heat generated by the ball screw feed system will produce thermal errors, which will cause the positioning accuracy to decrease. The thermal simulation modeling of the ball screw feed system is the basis for compensating thermal errors. The current thermal characteristic modeling method simplifies the reciprocating movement of the nut pair on the screw shaft to varying degrees, which leads to a decrease in simulation accuracy. In this paper, the nut is regarded as a moving heat source, and a novel method is adopted to make the moving process of the heat source closer to the actual nut movement process. The finite difference method is used to simulate the temperature field and thermal error of the ball screw feed system under different working conditions. Firstly, based on the heat transfer theory, the heat conduction differential equation of the feed system is established and discretized. The thermal error model of the ball screw feed system is established. Then, the relationship between nut heat source position and operating time is established to simulate nut reciprocating motion. Finally, the temperature and thermal error experiments of the ball screw feed system were carried out, and the temperature experiment results were compared with the simulation results of the finite difference method. The results show that the maximum simulation error of the average temperature in the operating interval is 11.4%, and the maximum simulation error of thermal error is 16.4%, which verifies the validity and correctness of the method. The thermal characteristic modeling method of the ball screw feed system proposed in this paper has a substantial application value for accurately obtaining the temperature field of the feed system.
引用
收藏
页数:23
相关论文
共 44 条
[21]   Thermal boundary condition optimization of ball screw feed drive system based on response surface analysis [J].
Liu, Jialan ;
Ma, Chi ;
Wang, Shilong ;
Wang, Sibao ;
Yang, Bo ;
Shi, Hu .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019, 121 :471-495
[22]   Comprehensive thermal compensation of the servo axes of CNC machine tools [J].
Liu, Kuo ;
Liu, Yu ;
Sun, Mingjia ;
Wu, Yuliang ;
Zhu, Tiejun .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (9-12) :2715-2728
[23]   Simulation and experimental study on the thermally induced deformations of high-speed spindle system [J].
Ma, Chi ;
Yang, Jun ;
Zhao, Liang ;
Mei, Xuesong ;
Shi, Hu .
APPLIED THERMAL ENGINEERING, 2015, 86 :251-268
[24]   Thermal characteristics analysis and experimental study on the high-speed spindle system [J].
Ma, Chi ;
Mei, Xuesong ;
Yang, Jun ;
Zhao, Liang ;
Shi, Hu .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 79 (1-4) :469-489
[25]   A convective heat transfer coefficient algorithm for thermal analysis of machine tools considering a temperature change [J].
Mao, Xiaobo ;
Mao, Kuanmin ;
Wang, Fengyun ;
Yan, Bo ;
Lei, Sheng .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (5-8) :1877-1889
[26]   Analysis of the Thermal Characteristics of Machine Tool Feed System Based on Finite Element Method [J].
Mao, Xiaobo ;
Mao, Kuanmin ;
Du, Yikang ;
Wang, Fengyun ;
Yan, Bo .
2017 INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES IN DESIGN, MECHANICAL AND AERONAUTICAL ENGINEERING (ATDMAE 2017), 2017, 234
[27]   Thermal issues in machine tools [J].
Mayr, Josef ;
Jedrzejewski, Jerzy ;
Uhlmann, Eckart ;
Donmez, M. Alkan ;
Knapp, Wolfgang ;
Haertig, Frank ;
Wendt, Klaus ;
Moriwaki, Toshimichi ;
Shore, Paul ;
Schmitt, Robert ;
Brecher, Christian ;
Wuerz, Timo ;
Wegener, Konrad .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2012, 61 (02) :771-791
[28]   Thermal Analysis of a Ball Screw by ADI Finite Difference Method [J].
Min, Bog-Ki ;
Park, Chun-Hong ;
Chung, Sung-Chong .
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2018, 42 (11) :975-984
[29]   Thermal Analysis of Ballscrew Systems by Explicit Finite Difference Method [J].
Min, Bog-Ki ;
Park, Chun-Hong ;
Chung, Sung-Chong .
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2016, 40 (01) :41-51
[30]   Thermo-mechanical modelling of ball screw preload force variation in different working conditions [J].
Oyanguren, A. ;
Larranaga, J. ;
Ulacia, I. .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (1-4) :723-739