Synthesis and characterization of polyurethane foams derived of fully renewable polyester polyols from sorbitol

被引:34
|
作者
Furtwengler, Pierre [1 ]
Perrin, Remi [2 ]
Redl, Andreas [3 ]
Averous, Luc [1 ]
机构
[1] Univ Strasbourg, BioTeam ICPEES ECPM, UMR CNRS 7515, 25 Rue Becquerel, F-67087 Strasbourg 2, France
[2] Soprema, 14 Rue St Nazaire, F-67025 Strasbourg 1, France
[3] Tereos, ZI & Portuaire, BP 32, F-67390 Marckolsheim, France
关键词
Sorbitol; Esterification; Polyurethane; Polyester; Foam; OIL-BASED POLYOL; P-31; NMR-SPECTROSCOPY; POLYISOCYANURATE FOAMS; CATALYTIC PRODUCTION; RECENT PROGRESS; VEGETABLE-OILS; SUGAR ALCOHOLS; GLYCEROL; BIOMASS; PERFORMANCE;
D O I
10.1016/j.eurpolymj.2017.10.020
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
This work globally redesigns the conventional approach in obtaining polyurethane foams (PUF), from sorbitol. Fully biobased polyester polyols were synthesized from sorbitol, adipic or succinic acid and different renewable C2 to C12 diols as the first step towards the elaboration of PUF. Sorbitol-based polyester polyols were synthesized through a two-step esterification without catalyst. The absence of a catalyst limits some side reactions and focuses the reaction on the primary hydroxyl groups of the sorbitol, to obtain the linear molecular structure. The global yields of the corresponding esterifications were above 80%. Hydroxyl values and acid values of the corresponding linear biobased polyester polyols ranged from 440 to 683 mg KOH/g, and from 11 to 49 mg KOH/g, respectively. Acid values were decreased below 10 mg KOH/g by neutralization. PUF were prepared with polyols blends containing this biobased polyester polyol (up to 75 wt%) and a conventional fossil based polyol e.g., oxypropylated glycerol, which present a high fossil content. The fmal biobased content of the PUF ranged up to 28 wt% in contrast to 9 wt% for the reference. Then the addition of neat glycerol to the polyol blend increased the final biobased contents of the PUF foams up to 31 wt%. In contrast with the traditional approach consisting of modifying the catalyst content, the activation of the reactive foaming process was improved through initial polyols blends. The final biobased PUF foaming kinetic was similar to that of the polyether polyol, used as a reference. Finally, the effects of chemical and physical blowing agents (water vs. isopentane) were compared on the foaming rate and foam structure. The use of chemical blowing agent efficiently decreased the foam gel time of 33% and increased the foaming rate of 1 mm/s with biobased systems. Besides, the polyols architecture has a strong influence on the foam tack free time which varied from 50 to 235 s for the studied PUF.
引用
收藏
页码:319 / 327
页数:9
相关论文
共 50 条
  • [42] Rigid polyurethane foams from lignin based-polyols
    Catetol, Carolina
    Barreiro, Filomena
    Rodrigues, Alirio
    Belgacem, Naceur
    IVTH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES, 2008, 1042 : 243 - +
  • [43] Flammability of polyurethane foams obtained from vegetable oil polyols
    Kirpluks, M.
    Yakushin, V.
    Cabulis, U.
    Stirna, U.
    Lazdina, B.
    PROCEEDINGS OF BALTIC POLYMER SYMPOSIUM 2007, 2007, : 201 - 206
  • [44] Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid
    Velayutham, T. S.
    Majid, W. H. Abd
    Ahmad, A. B.
    Kang, Gan Yik
    Gan, S. N.
    PROGRESS IN ORGANIC COATINGS, 2009, 66 (04) : 367 - 371
  • [45] Synthesis of aminophosphonate polyols and polyurethane foams with improved fire retardant properties
    Borreguero, Ana M.
    Velencoso, Maria M.
    Rodriguez, Juan F.
    Serrano, Angel
    Jose Carrero, M.
    Ramos, Maria J.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (29)
  • [46] Biobased flexible polyurethane foams manufactured from lactide-based polyester-ether polyols for automotive applications
    Bote, Sayli Devdas
    Kiziltas, Alper
    Scheper, Ian
    Mielewski, Deborah
    Narayan, Ramani
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (29)
  • [47] Synthesis and characterization of transparent and high impact resistance polyurethane coatings based on polyester polyols and isocyanate trimers
    Zhang, Junrui
    Tu, Weiping
    Dai, Zilin
    PROGRESS IN ORGANIC COATINGS, 2012, 75 (04) : 579 - 583
  • [48] Synthesis and characterization of castor oil-based branched polyols from renewable resources and their polyurethane-urea coatings
    Allauddin Shaik
    Kabir Baidya
    Kirankumar Nehete
    Subarna Shyamroy
    Journal of Coatings Technology and Research, 2019, 16 : 387 - 400
  • [49] Synthesis and characterization of castor oil-based branched polyols from renewable resources and their polyurethane-urea coatings
    Shaik, Allauddin
    Baidya, Kabir
    Nehete, Kirankumar
    Shyamroy, Subarna
    JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, 2019, 16 (02) : 387 - 400
  • [50] Polyurethane networks from formiated soy polyols: Synthesis and mechanical characterization
    Monteavaro, LL
    da Silva, EO
    Costa, APO
    Samios, D
    Gerbase, AE
    Petzhold, CL
    JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY, 2005, 82 (05) : 365 - 371