Synthesis and characterization of polyurethane foams derived of fully renewable polyester polyols from sorbitol

被引:34
|
作者
Furtwengler, Pierre [1 ]
Perrin, Remi [2 ]
Redl, Andreas [3 ]
Averous, Luc [1 ]
机构
[1] Univ Strasbourg, BioTeam ICPEES ECPM, UMR CNRS 7515, 25 Rue Becquerel, F-67087 Strasbourg 2, France
[2] Soprema, 14 Rue St Nazaire, F-67025 Strasbourg 1, France
[3] Tereos, ZI & Portuaire, BP 32, F-67390 Marckolsheim, France
关键词
Sorbitol; Esterification; Polyurethane; Polyester; Foam; OIL-BASED POLYOL; P-31; NMR-SPECTROSCOPY; POLYISOCYANURATE FOAMS; CATALYTIC PRODUCTION; RECENT PROGRESS; VEGETABLE-OILS; SUGAR ALCOHOLS; GLYCEROL; BIOMASS; PERFORMANCE;
D O I
10.1016/j.eurpolymj.2017.10.020
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
This work globally redesigns the conventional approach in obtaining polyurethane foams (PUF), from sorbitol. Fully biobased polyester polyols were synthesized from sorbitol, adipic or succinic acid and different renewable C2 to C12 diols as the first step towards the elaboration of PUF. Sorbitol-based polyester polyols were synthesized through a two-step esterification without catalyst. The absence of a catalyst limits some side reactions and focuses the reaction on the primary hydroxyl groups of the sorbitol, to obtain the linear molecular structure. The global yields of the corresponding esterifications were above 80%. Hydroxyl values and acid values of the corresponding linear biobased polyester polyols ranged from 440 to 683 mg KOH/g, and from 11 to 49 mg KOH/g, respectively. Acid values were decreased below 10 mg KOH/g by neutralization. PUF were prepared with polyols blends containing this biobased polyester polyol (up to 75 wt%) and a conventional fossil based polyol e.g., oxypropylated glycerol, which present a high fossil content. The fmal biobased content of the PUF ranged up to 28 wt% in contrast to 9 wt% for the reference. Then the addition of neat glycerol to the polyol blend increased the final biobased contents of the PUF foams up to 31 wt%. In contrast with the traditional approach consisting of modifying the catalyst content, the activation of the reactive foaming process was improved through initial polyols blends. The final biobased PUF foaming kinetic was similar to that of the polyether polyol, used as a reference. Finally, the effects of chemical and physical blowing agents (water vs. isopentane) were compared on the foaming rate and foam structure. The use of chemical blowing agent efficiently decreased the foam gel time of 33% and increased the foaming rate of 1 mm/s with biobased systems. Besides, the polyols architecture has a strong influence on the foam tack free time which varied from 50 to 235 s for the studied PUF.
引用
收藏
页码:319 / 327
页数:9
相关论文
共 50 条
  • [31] Synthesis and characterization of polyurethane rigid foams from polyether polyols with isosorbide as the bio-based starting agent
    Ting Jiang
    Wenjuan Wang
    Dinghua Yu
    Di Huang
    Na Wei
    Yi Hu
    He Huang
    Journal of Polymer Research, 2018, 25
  • [32] SYNTHESIS OF NEW AROMATIC MANNICH POLYOLS FOR RIGID POLYURETHANE FOAMS
    Rotaru, Iolanda
    Ionescu, M.
    Donescu, D.
    Vuluga, M.
    Purcar, Violeta
    UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE, 2007, 69 (02): : 35 - 42
  • [33] Flexible Polyurethane Foams Modified with Novel Coconut Monoglycerides-Based Polyester Polyols
    Omisol, Christine Joy M.
    Aguinid, Blessy Joy M.
    Abilay, Gerson Y.
    Asequia, Dan Michael
    Tomon, Tomas Ralph
    Sabulbero, Karyl Xyrra
    Erjeno, Daisy Jane
    Osorio, Carlo Kurt
    Usop, Shashwa
    Malaluan, Roberto
    Dumancas, Gerard
    Resurreccion, Eleazer P.
    Lubguban, Alona
    Apostol, Glenn
    Siy, Henry
    Alguno, Arnold C.
    Lubguban, Arnold
    ACS OMEGA, 2024, 9 (04): : 4497 - 4512
  • [34] Synthesis and characterization of polyurethane-organoclay nanocomposites based on renewable castor oil polyols
    Alaa, M. A.
    Yusoh, Kamal
    Hasany, S. F.
    POLYMER BULLETIN, 2015, 72 (01) : 1 - 17
  • [35] Synthesis and characterisation of heatproof polyester polyols used in polyurethane adhesive
    Xu, Tingting
    Zhang, Cuifeng
    Chen, Lijun
    PIGMENT & RESIN TECHNOLOGY, 2016, 45 (06) : 439 - 443
  • [36] Characterization of Rigid Composite Polyester Foams Derived from Biomass
    Nicolas Auclair
    Pierre Blanchet
    Journal of Polymers and the Environment, 2020, 28 : 1601 - 1613
  • [37] Characterization of Rigid Composite Polyester Foams Derived from Biomass
    Auclair, Nicolas
    Blanchet, Pierre
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2020, 28 (06) : 1601 - 1613
  • [38] Sustainable rigid polyurethane foams based on recycled polyols from chemical recycling of waste polyurethane foams
    Shin, Se-Ra
    Kim, Han-Na
    Liang, Jing-Yu
    Lee, Sang-Hyub
    Lee, Dai-Soo
    JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (35)
  • [39] Characterization of Flexible Polyurethane Foams based on Soybean-Based Polyols
    Das, Sudipto
    Dave, Mahendra
    Wilkes, G. L.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 112 (01) : 299 - 308
  • [40] Preparation and characterization of high initial bonding strength reactive hot melt polyurethane adhesive derived from phthalate polyester polyols
    Yan, Qiming
    Lin, Zhongxiang
    Lin, Xing
    Fang, Cheng
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2018, 32 (20) : 2282 - 2297