Synthesis and characterization of polyurethane foams derived of fully renewable polyester polyols from sorbitol

被引:34
|
作者
Furtwengler, Pierre [1 ]
Perrin, Remi [2 ]
Redl, Andreas [3 ]
Averous, Luc [1 ]
机构
[1] Univ Strasbourg, BioTeam ICPEES ECPM, UMR CNRS 7515, 25 Rue Becquerel, F-67087 Strasbourg 2, France
[2] Soprema, 14 Rue St Nazaire, F-67025 Strasbourg 1, France
[3] Tereos, ZI & Portuaire, BP 32, F-67390 Marckolsheim, France
关键词
Sorbitol; Esterification; Polyurethane; Polyester; Foam; OIL-BASED POLYOL; P-31; NMR-SPECTROSCOPY; POLYISOCYANURATE FOAMS; CATALYTIC PRODUCTION; RECENT PROGRESS; VEGETABLE-OILS; SUGAR ALCOHOLS; GLYCEROL; BIOMASS; PERFORMANCE;
D O I
10.1016/j.eurpolymj.2017.10.020
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
This work globally redesigns the conventional approach in obtaining polyurethane foams (PUF), from sorbitol. Fully biobased polyester polyols were synthesized from sorbitol, adipic or succinic acid and different renewable C2 to C12 diols as the first step towards the elaboration of PUF. Sorbitol-based polyester polyols were synthesized through a two-step esterification without catalyst. The absence of a catalyst limits some side reactions and focuses the reaction on the primary hydroxyl groups of the sorbitol, to obtain the linear molecular structure. The global yields of the corresponding esterifications were above 80%. Hydroxyl values and acid values of the corresponding linear biobased polyester polyols ranged from 440 to 683 mg KOH/g, and from 11 to 49 mg KOH/g, respectively. Acid values were decreased below 10 mg KOH/g by neutralization. PUF were prepared with polyols blends containing this biobased polyester polyol (up to 75 wt%) and a conventional fossil based polyol e.g., oxypropylated glycerol, which present a high fossil content. The fmal biobased content of the PUF ranged up to 28 wt% in contrast to 9 wt% for the reference. Then the addition of neat glycerol to the polyol blend increased the final biobased contents of the PUF foams up to 31 wt%. In contrast with the traditional approach consisting of modifying the catalyst content, the activation of the reactive foaming process was improved through initial polyols blends. The final biobased PUF foaming kinetic was similar to that of the polyether polyol, used as a reference. Finally, the effects of chemical and physical blowing agents (water vs. isopentane) were compared on the foaming rate and foam structure. The use of chemical blowing agent efficiently decreased the foam gel time of 33% and increased the foaming rate of 1 mm/s with biobased systems. Besides, the polyols architecture has a strong influence on the foam tack free time which varied from 50 to 235 s for the studied PUF.
引用
收藏
页码:319 / 327
页数:9
相关论文
共 50 条
  • [21] Flexible polyurethane foams modified with biobased polyols: Synthesis and physical-chemical characterization
    Soto, G. D.
    Marcovich, N. E.
    Mosiewicki, M. A.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (35)
  • [22] Flexible polyurethane foams modified with biobased polyols: Synthesis and physical-chemical characterization
    Mosiewicki, M.A. (mirna@fi.mdp.edu.ar), 1600, John Wiley and Sons Inc (133):
  • [23] Renewable Self-Blowing Non-Isocyanate Polyurethane Foams from Lysine and Sorbitol
    Clark, James H.
    Farmer, Thomas J.
    Ingram, Ian D. V.
    Lie, Yann
    North, Michael
    EUROPEAN JOURNAL OF ORGANIC CHEMISTRY, 2018, 2018 (31) : 4265 - 4271
  • [24] Synthesis of Biobased Polyols from Soybean Meal for Application in Rigid Polyurethane Foams
    Bote, Sayli Devdas
    Narayan, Ramani
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2021, 60 (16) : 5733 - 5743
  • [25] Polyester-ether Polyols for Rigid Polyurethane Foams, Prepared from PET Wastes by a Clean Method
    Duldner, Monica
    Bartha, Emeric
    Iancu, Stela
    Capitanu, Stanca
    Nica, Simona
    Garea, Sorina
    MATERIALE PLASTICE, 2016, 53 (03) : 347 - 353
  • [26] Elaboration and Characterization of Polyurethane Foams Based on Renewably Sourced Polyols
    Zineb Kahlerras
    Ratiba Irinislimane
    Stephane Bruzaud
    Naima Belhaneche-Bensemra
    Journal of Polymers and the Environment, 2020, 28 : 3003 - 3018
  • [27] Synthesis and characterization of a renewable polyester containing oxabicyclic dicarboxylate derived from furfural
    Tachibana, Yuya
    Yamahata, Masayuki
    Kasuya, Ken-ichi
    GREEN CHEMISTRY, 2013, 15 (05) : 1318 - 1325
  • [28] Elaboration and Characterization of Polyurethane Foams Based on Renewably Sourced Polyols
    Kahlerras, Zineb
    Irinislimane, Ratiba
    Bruzaud, Stephane
    Belhaneche-Bensemra, Naima
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2020, 28 (11) : 3003 - 3018
  • [29] Synthesis and characterization of polyurethane rigid foams from polyether polyols with isosorbide as the bio-based starting agent
    Jiang, Ting
    Wang, Wenjuan
    Yu, Dinghua
    Huang, Di
    Wei, Na
    Hu, Yi
    Huang, He
    JOURNAL OF POLYMER RESEARCH, 2018, 25 (06)
  • [30] Polyurethane Foams from Soyoil-Based Polyols
    Campanella, A.
    Bonnaillie, L. M.
    Wool, R. P.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 112 (04) : 2567 - 2578