Investigation on magnetic properties of mechanically alloyed τ-MnAlC with Fe addition

被引:2
作者
Van Tang Nguyen [1 ,2 ]
Mazaleyrat, Frederic [3 ]
Calvayrac, Florent [4 ]
Quang Minh Ngo [1 ,2 ,5 ]
Randrianantoandro, Nirina [4 ]
机构
[1] Univ Sci & Technol Hanoi, Vietnam Acad Sci & Technol, 18 Hoang Quoc Viet, Hanoi, Vietnam
[2] Grad Univ Sci & Technol, Vietnam Acad Sci & Technol, 18 Hoang Quoc Viet, Hanoi, Vietnam
[3] Univ Paris Saclay, ENS Paris Saclay, CNRS, SATIE, 4 Ave Sci, F-91190 Gif Sur Yvette, France
[4] Le Mans Univ, Inst Mol & Mate Riaux Mans, UMR CNRS 6283, Ave Olivier Messiaen, F-72085 Le Mans 9, France
[5] Vietnam Acad Sci & Technol, Inst Mat Sci, 18 Hoang Quoc Viet, Hanoi, Vietnam
关键词
Mechanical alloying; Thermal Stability; Magnetic properties; MnFeAlC alloy; PERMANENT-MAGNETS; PHASE; MN;
D O I
10.1016/j.jmmm.2021.168892
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of Fe addition on thermal stability, crystallography, and magnetic properties of tau-Mn51Al47C2 was investigated. Alloys with composition Mn51-xFexAl47C2 (x = 0, 0.5, 1, 2, and 4) were synthesized by mechanical alloying method. High purity of tau-Mn(Fe)AlC up to 98% could be obtained after 10 h of milling, then annealed at 1050 degrees C for 1 h, and followed by an aging process at appropriate temperatures from 515 to 540 degrees C for 50 min. It was found that the thermal stability of both epsilon and tau phases was enhanced by the addition of Fe up to 4 at.% into MnAlC alloy through a shifting of epsilon-to-tau transformation temperature to high temperature region and a reduction in c/a ratio of Fe doped tau-MnAlC compared to iron free r-MnAlC. While the magnetization and Curie temperature of Fe doped tau-MnAlC showed a reduction compared to iron free tau-Mn51Al47C2, coercivity seems not to be significantly affected. Ab initio calculation showed a lower magnetic moment of Fe (mu(Fe) = 1.77 mu(B)) compared to Mn (mu(Mn)(_average) = 2.36 mu(B)) in tau-Mn(Fe)AlC when Fe substituted Mn position at la site.
引用
收藏
页数:8
相关论文
共 27 条
[21]   An alternative way of linearizing the augmented plane-wave method [J].
Sjöstedt, E ;
Nordström, L ;
Singh, DJ .
SOLID STATE COMMUNICATIONS, 2000, 114 (01) :15-20
[22]   Predicting the Future of Permanent-Magnet Materials [J].
Skomski, Ralph ;
Manchanda, Priyanka ;
Kumar, Pankaj ;
Balamurugan, B. ;
Kashyap, Arti ;
Sellmyer, D. J. .
IEEE TRANSACTIONS ON MAGNETICS, 2013, 49 (07) :3215-3220
[23]   Effect of Carbon Addition on Magnetic Order in Mn-Al-C Alloys [J].
Tyrman, Muriel ;
Pasko, Alexandre ;
Perriere, Loic ;
Etgens, Victor ;
Isnard, Olivier ;
Mazaleyrat, Frederic .
IEEE TRANSACTIONS ON MAGNETICS, 2017, 53 (11)
[24]   Mechanical alloying and theoretical studies of MnAl(C) magnets [J].
Van Tang Nguyen ;
Calvayrac, Florent ;
Bajorek, Anna ;
Randrianantoandro, Nirina .
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2018, 462 :96-104
[25]  
Wells A. F., 2012, STRUCTURAL INORGANIC
[26]   Enhanced formation and improved thermal stability of ferromagnetic τ phase in nanocrystalline Mn55Al45 alloys by Co addition [J].
Xiang, Zhen ;
Song, Yiming ;
Deng, Baiwen ;
Cui, Erbiao ;
Yu, Lunzhou ;
Lu, Wei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 783 :416-422
[27]   Structural and magnetic properties of nanostructured Mn-Al-C magnetic materials [J].
Zeng, Q. ;
Baker, I. ;
Cui, J. B. ;
Yan, Z. C. .
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2007, 308 (02) :214-226