Study of Mechanical and Thermomechanical Properties of Vinyl Ester/Polyurethane Interpenetrating Polymer Network Based Hybrid Composites

被引:12
作者
Goswami, Sudipta [1 ]
Ranjan, Jagesh Kumar [1 ]
机构
[1] Birla Inst Technol, Dept Chem Engn, Ranchi 835215, Jharkhand, India
关键词
Hybrid composites; Interpenetrating polymer networks; Kenaf fibres; Vinyl ester; Polyurethane; Interlaminar shear strength; RESIN; EPOXY; POLYURETHANE; HYDROGELS; FIBERS; MATRIX;
D O I
10.1007/s12221-020-9338-5
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
Interpenetrating polymer networks of vinyl ester (VE) resin and polyurethane (PU) was synthesized using blend ratio of 93:7 (w/w). Bio-composites with Kenaf fibre reinforcement in VE/PU IPN matrix were prepared by hand-lay-up. Similar bio-composites were prepared with vinyl silane treated kenaf (SKF) and fibre content was varied by 15, 25, 35 and 40 wt. % of the matrix in both the cases. Hybrid composites consisting of both silica nano filler (2 wt. %) and 35 % of kenaf fibre together in VE/PU IPN (93:7 w/w) matrix were prepared. Analysis of these composites showed that 93VESi35SKF hybrid composite possessed improved tensile strength, Young's modulus and Interlaminar Shear Strength by 3.12, 0.24 % and 4.13 % respectively in comparison to that of the 93VESi35KF. Thus silane treatment of natural fibre caused better fibre/matrix adhesion in these hybrid composites. Also the same properties increased by 9.22, 18.53 and 22.07 % respectively for 93VESi35SKF in comparison to that of 93VE35KF showing that the hybrid composite was stronger than the corresponding bio-composite without nanofiller.
引用
收藏
页码:1096 / 1114
页数:19
相关论文
共 52 条
[21]   Effect of CNT coating on the overall thermal conductivity of unidirectional polymer hybrid nanocomposites [J].
Hassanzadeh-Aghdam, M. K. ;
Mahmoodi, M. J. ;
Jamali, J. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 124 :190-200
[22]   Micromechanical modeling of thermal expansion coefficients for unidirectional glass fiber-reinforced polyimide composites containing silica nanoparticles [J].
Hassanzadeh-Aghdam, M. K. ;
Ansari, R. ;
Darvizeh, A. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2017, 96 :110-121
[23]   The role of thermal residual stress on the yielding behavior of carbon nanotube-aluminum nanocomposites [J].
Hassanzadeh-Aghdam, Mohammad Kazem ;
Mahmoodi, Mohammad Javad ;
Kazempour, Mohammad Reza .
INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, 2018, 14 (02) :263-275
[24]   The Effects of Recycled Acrylonitrile Butadiene Rubber Content and Maleic Anhydride Modified Polypropylene (PPMAH) on the Mixing, Tensile Properties, Swelling Percentage and Morphology of Polypropylene/Recycled Acrylonitrile Butadiene Rubber/Rice Husk Powder (PP/NBRr/RHP) Composites [J].
Ismail, H. ;
Ragunathan, S. ;
Hussin, K. .
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (13) :1323-1328
[25]   New trends in vinyl ester resins [J].
Jaswal, Shipra ;
Gaur, Bharti .
REVIEWS IN CHEMICAL ENGINEERING, 2014, 30 (06) :567-581
[26]   Dynamic and mechanical properties of vinyl ester/epoxy interpenetrating polymer networks [J].
Jia, Jinrong ;
Huang, Zhixiong ;
Qin, Yan .
HIGH PERFORMANCE POLYMERS, 2013, 25 (06) :652-657
[27]   Thermal, mechanical, and morphological properties of soybean oil-based polyurethane/epoxy resin interpenetrating polymer networks (IPNs) [J].
Jin, Hui ;
Zhang, Yuge ;
Wang, Chengshuang ;
Sun, Yifan ;
Yuan, Zuanru ;
Pan, Youqiang ;
Xie, Hongfeng ;
Cheng, Rongshi .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2014, 117 (02) :773-781
[28]   Toughness response of vinylester/epoxy-based thermosets of interpenetrating network structure as a function of the epoxy resin formulation: Effects of the cyclohexylene linkage [J].
Karger-Kocsis, J ;
Gryshchuk, O ;
Jost, N .
JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 88 (08) :2124-2131
[29]  
Duong LD, 2014, BIORESOURCES, V9, P2359
[30]   Thermal properties of microsilica and nanosilica filled polypropylene composite with epoxy as dispersing aid [J].
Leng, P. B. ;
Akil, Hazizan Md ;
Lin, Ong Hui .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (08) :761-770