Microstructures and mechanical properties of Fe-Cr stainless steel parts fabricated by ultrasonic vibration-assisted laser engineered net shaping process

被引：78
作者：
Ning, Fuda [1 ]
Cong, Weilong [1 ]
机构：
[1] Texas Tech Univ, Dept Ind Engn, Lubbock, TX 79409 USA
来源：
MATERIALS LETTERS | 2016年 / 179卷
关键词：
Microstructure; Mechanical properties; Ultrasonic vibration; Laser engineered net shaping; Powder technology; ALLOY;
D O I：
10.1016/j.matlet.2016.05.055
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper studied fabrication of Fe-Cr stainless steel parts using the novel ultrasonic vibration-assisted laser engineered net shaping (UV-A LENS) process and investigated the effects of ultrasonic vibration on the microstructures and mechanical properties. The results showed that cross-sectional morphology as well as internal microstructure of the parts were changed by applying ultrasonic vibration in LENS process. Porosity, micro-cracks, and microstructural grain size were remarkably decreased due to the actions and influences of ultrasonic vibration. In addition, mechanical properties of the parts fabricated by UV-A LENS process were significantly improved compared with that of the parts fabricated by LENS without ultrasonic vibration. These findings indicated that UV-A LENS was an effective process to generate uniform morphology and fine microstructures to improve the mechanical properties of the parts. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：61 / 64
页数：4
相关论文
共 50 条
  • [31] Microstructure and mechanical properties of a Fe-28%Al-5%Cr-1%Nb-2%B alloy fabricated by Laser Engineered Net Shaping
    Lazinska, M.
    Durejko, T.
    Zasada, D.
    Bojar, Z.
    MATERIALS LETTERS, 2017, 196 : 87 - 90
  • [32] Study on the materials flow, microstructure and mechanical properties of ultrasonic vibration-assisted friction stir weld of 1500 MPa martensitic steel
    Zhu, Shuhao
    Wang, Naiqian
    Li, Shuai
    Huang, Guan
    Ge, Shang
    Du, Peihua
    Zhang, Li
    Sun, Yufeng
    Guan, Shaokang
    MATERIALS CHARACTERIZATION, 2023, 206
  • [33] Effect of ultrasonic vibration-assisted laser cladding frequency on the microstructure and properties of Fe-0.5C-15Cr alloy cladding layers
    Guo, Tieming
    Lin, Wenbin
    Peng, Xiong
    Zhang, Yiwen
    Zhang, Ruihua
    Nan, Xueli
    Qiu, Qiao
    Yi, Xiangbin
    SURFACE & COATINGS TECHNOLOGY, 2024, 480
  • [34] Structure and properties of the Fe3Al-type intermetallic alloy fabricated by laser engineered net shaping (LENS)
    Durejko, Tomasz
    Zietala, Michal
    Lazinska, Magda
    Lipinski, Stanislaw
    Polkowski, Wojciech
    Czujko, Tornasz
    Varin, Robert A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 650 : 374 - 381
  • [35] Enhanced mechanical properties for 304L stainless steel parts fabricated by laser-foil-printing additive manufacturing
    Hung, Chia-Hung
    Sutton, Austin
    Li, Yingqi
    Shen, Yiyu
    Tsai, Hai-Lung
    Leu, Ming C.
    JOURNAL OF MANUFACTURING PROCESSES, 2019, 45 : 438 - 446
  • [36] Effect of ultrasonic vibration and deep cryogenic treatment on the residual stress, mechanical properties and microstructures of HR-2 austenitic stainless steel
    Yang, Quanwei
    Dong, Zhigang
    Kang, Renke
    Wei, Zhaocheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 900
  • [37] Investigation of Micro-Hardness, Wear Resistance, and Defects of 316L Stainless Steel and TiC Composite Coating Fabricated by Laser Engineered Net Shaping
    Lian, Guofu
    Zhao, Chenmin
    Zhang, Yang
    Huang, Xu
    Chen, Changrong
    Jiang, Jibin
    COATINGS, 2019, 9 (08)
  • [38] The evolution of microstructures, corrosion resistance and mechanical properties of AZ80 joints using ultrasonic vibration assisted welding process
    Li, Hui
    Zhang, Jiansheng
    MATERIALS RESEARCH EXPRESS, 2017, 4 (12):
  • [39] Microstructure and mechanical properties of rheo-diecast hypereutectic Al-Si alloy with 2%Fe assisted with ultrasonic vibration process
    Lin, Chong
    Wu, Shusen
    Lu, Shulin
    An, Ping
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 568 : 42 - 48
  • [40] Influences of tilt angles on microstructure and mechanical properties of 316L stainless steel parts fabricated by selective laser melting (SLM)
    Ni, Cong
    Shi, Yan
    Liu, Jia
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08):
12345