Recrystallization kinetics of cold-rolled U-10 wt% Mo

被引：15

作者：

Frazier, William E. ^{[1
]}

Hu, Shenyang ^{[1
]}

Overman, Nicole ^{[1
]}

Prabhakaran, Ramprashad ^{[1
]}

Lavender, Curt ^{[1
]}

Joshi, Vineet V. ^{[1
]}

机构：

[1] Pacific Northwest Natl Lab, 902 Battelle Blvd, Richland, WA 99354 USA

来源：

JOURNAL OF NUCLEAR MATERIALS | 2019年 / 513卷

基金：

美国能源部;

关键词：

FISSION-INDUCED RECRYSTALLIZATION; STATIC RECRYSTALLIZATION; HEAT-TREATMENT; GRAIN-GROWTH; PHASE-CHANGE; GAMMA-PHASE; MICROSTRUCTURE; URANIUM; STEEL; DIFFRACTION;

D O I：

10.1016/j.jnucmat.2018.10.046

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Samples of U-10 wt%Mo (U-Mo) alloy were thermomechanically processed and annealed at 600 degrees C and 700 degrees C for periods lasting up to 8 h. Annealed microstructures were examined using electron back-scattered diffraction in order to estimate the completeness of recrystallization. Hardness measurements of the U-Mo samples were taken to further qualify the progress of recovery and recrystallization. This allowed us to evaluate the recrystallization activation energy and the recrystallization kinetics with a Johnson-Mehl-Avrami-Kolmogorov equation. The results show that the activation energy of recrystallization is approximately 100.6 +/- 23.1 kJ/mol. The mechanisms active in the recrystallization of cold-rolled U-10 wt% Mo are discussed in the context of these results. (C) 2018 Elsevier B.V. All rights reserved.

引用

页码：56 / 61

页数：6

共 48 条

[1] Adam K., 2018, 3D MICROSTRUCTURAL E, DOI [10.1088/1361-651X/aaa146, DOI 10.1088/1361-651X/AAA146]
[2] Granulation, Phase Change, and Microstructure - Kinetics of Phase Change. III
Avrami, M
[J]. JOURNAL OF CHEMICAL PHYSICS, 1941, 9 (02) : 177 - 184
[3] Kinetics of phase change I - General theory
Avrami, M
[J]. JOURNAL OF CHEMICAL PHYSICS, 1939, 7 (12) : 1103 - 1112
[4] Avrami M., 1940, J. Chem. Phys, V8, P212, DOI [10.1063/1.1750631, DOI 10.1063/1.1750631]
[5] Microstructural characteristics of DU-xMo alloys with x=7-12 wt%
Burkes, Douglas E.
Hartmann, Thomas
Prabhakaran, Ramprashad
Jue, Jan-Fong
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 479 (1-2) : 140 - 147
[6] Effect of second phase particles and stringers on microstructures after rolling and recrystallization
Cheng, Guang
Hu, Xiaohua
Frazier, William E.
Lavender, Curt A.
Joshi, Vineet V.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 736 : 41 - 52
[7] Microstructural evolution of a uranium-10 wt.% molybdenum alloy for nuclear reactor fuels
Clarke, A. J.
Clarke, K. D.
McCabe, R. J.
Necker, C. T.
Papin, P. A.
Field, R. D.
Kelly, A. M.
Tucker, T. J.
Forsyth, R. T.
Dickerson, P. O.
Foley, J. C.
Swenson, H.
Aikin, R. M., Jr.
Dombrowski, D. E.
[J]. JOURNAL OF NUCLEAR MATERIALS, 2015, 465 : 784 - 792
[8] Grain boundary engineering to control the discontinuous precipitation in multicomponent U10Mo alloy
Devaraj, Arun
Kovarik, Libor
Kautz, Elizabeth
Arey, Bruce
Jana, Saumyadeep
Lavender, Curt
Joshi, Vineet
[J]. ACTA MATERIALIA, 2018, 151 : 181 - 190
[9] Division T., 2006, AN RECR VOL FRACT UR, V223, P33
[10] On the characterization of recrystallized fraction using electron backscatter diffraction: A direct comparison to local hardness in an IF steel using nanoindentation
Dziaszyk, S.
Payton, E. J.
Friedel, F.
Marx, V.
Eggeler, G.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (29-30): : 7854 - 7864

← 1 2 3 4 5 →