Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary aluminum alloys

被引:78
作者
Chen, Rui [1 ]
Xu, Qingyan [1 ]
Liu, Baicheng [1 ]
机构
[1] Tsinghua Univ, Sch Mat Sci & Engn, Minist Educ, Key Lab Adv Mat Proc Technol, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
Al-7Si-Mg alloy; Cellular automaton; Three dimensions; Crystallographic orientation; Dendrite growth; PHASE-FIELD SIMULATIONS; MULTICOMPONENT ALLOYS; DIRECTIONAL SOLIDIFICATION; MICROSTRUCTURE EVOLUTION; MECHANICAL-PROPERTIES; MODEL; MICROSEGREGATION; SELECTION; BEHAVIOR;
D O I
10.1016/j.commatsci.2015.04.035
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Due to the extensive applications in the automotive and aerospace industries of Al-7Si-Mg casting alloys, an understanding of their dendrite microstructural formation in three dimensions is of great importance in order to control the desirable microstructure, so as to modify the performance of castings. For this reason, a three-dimensional cellular automaton model (3-D CA) allowing for the prediction of dendrite growth of ternary alloys is presented. The growth kinetics of the solid/liquid (S/L) interface is calculated based on the solutal equilibrium approach. This proposed model introduces a modified decentered octahedron algorithm for neighborhood tracking, in order to eliminate the effects of mesh dependency on dendrite growth. The thermodynamic and kinetic data needed in the simulations are obtained through coupling with the Pandat software package in combination with thermodynamic/kinetic/equilibrium phase diagram calculation databases. The solute interactions between alloying elements are considered in the model. The model was first used to simulate the Al-7Si dendrite, followed by a validation using theoretical predictions. The influence of Mg content on the dendrite growth dynamics and dendrite morphologies was investigated. Also, the model was applied to Al-7Si-0.5Mg dendrite simulation both with and without a consideration of solute interactions between the Si and Mg alloying elements and the effects on dendrite growth process was analyzed using the simulation results. This model was finally used in order to simulate the dendrite growth in different crystallographic orientations in an Al-7Si-0.36Mg ternary alloy during polycrystalline solidification, resulting in a predicted secondary dendrite arm spacing (SDAS) and dendrite volume fraction data that show a reasonable agreement with experimental results. The single dendrite and polycrystalline growth simulations effectively demonstrate the capability of this model in predicting the three-dimensional dendrite microstructure of ternary alloys. (C) 2015 Published by Elsevier B.V.
引用
收藏
页码:90 / 100
页数:11
相关论文
共 36 条
[31]  
Zaeem M.A., 2013, J MATER SCI TECHNOL, V28, P3495
[32]   Simulation of dendrite growth in ternary alloys [J].
Zhang, RJ ;
He, Z ;
Wang, XY ;
Jie, WQ .
MATERIALS LETTERS, 2005, 59 (22) :2765-2768
[33]   A three-dimensional cellular automaton model for dendritic growth in multi-component alloys [J].
Zhang, Xianfei ;
Zhao, Jiuzhou ;
Jiang, Hongxiang ;
Zhu, Mingfang .
ACTA MATERIALIA, 2012, 60 (05) :2249-2257
[34]   A Three-Dimensional Cellular Automata Model for Dendrite Growth with Various Crystallographic Orientations During Solidification [J].
Zhao, Yan ;
Chen, Dengfu ;
Long, Mujun ;
Arif, Tansel T. ;
Qin, Rongshan .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (02) :719-725
[35]   Virtual front tracking model for the quantitative modeling of dendritic growth in solidification of alloys [J].
Zhu, M. F. ;
Stefanescu, D. M. .
ACTA MATERIALIA, 2007, 55 (05) :1741-1755
[36]   Effects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloys [J].
Zhu, Man ;
Jian, Zengyun ;
Yang, Gencang ;
Zhou, Yaohe .
MATERIALS & DESIGN, 2012, 36 :243-249