Characterization of vanadium and titanium oxide supported SBA-15

Supported vanadium and titanium oxide catalysts were prepared by adsorption and subsequent calcination of the vanadyl and titanyl acetylacetonate complexes, respectively, on mesoporous SBA-15 by the molecular designed dispersion (MDD) method. Liquid and gas phase depositions at different temperatures were carried out with vanadyl acetylacetonate, and the different results together with those of titanyl acetylacetonate in the liquid phase deposition were discussed. The bonding mechanism, the influence of the metal interaction with the support material, and differences due to the way of deposition and the temperature were investigated by TGA, chemical analysis, FTIR, and Raman spectroscopy. Elevated dissolving temperatures in the liquid phase led to higher final loadings on the SBA-15 without the formation of clusters, even at high loadings. The decomposition of the anchored vanadium and titanium complexes, their thermal stability, and the conversion to the covalently bound VOx and TiOx species on SBA-15 were studied and investigated by in situ transmission IR spectroscopy. In general, the titanium complex is more reactive than the vanadium complex toward the surface of SBA-15 and has a higher thermal stability. The MDD method of the VO(acac)(2) and TiO(acac)(2) enables to create a dispersed surface of supported VOx and TiOx respectively. The structure configurations of VOx and TiO, oxide catalysts obtained at different metal loadings were studied by Raman spectroscopy. Pore size distributions, XRD, and N-2 sorption confirmed the structural stability of these materials after grafting. VOx/SBA-15 and TiOx/SBA-15 samples, with different metal loadings, were also catalytically tested for the selective catalytic reduction (SCR) of NO with ammonia.