Influence of yarn extension on longitudinal structural characteristics of fibres

被引:3
作者
Kumar, A. [1 ]
Ishtiaque, S. M. [1 ]
Das, A. [1 ]
机构
[1] Indian Inst Technol, Dept Text Technol, New Delhi 110016, India
关键词
fibre extent; fibre-overlap index; fibre-pair-overlap length; fibre strain; slippage; straightening; tracer fibre; yarn extension; FAILURE;
D O I
10.1080/00405000.2011.613577
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
A detailed study on the effect of progressive yarn extension on longitudinal structural characteristics of fibres has been reported in the present paper. An image processing-based system to characterise and visualise the configuration of fibres in yarn under extended mode has been adopted. A detailed study has been reported on the changes in longitudinal structural characteristics of fibres, such as fibre extent, fibre strain, straightening and slippage of fibres, fibre-pair-overlap length and fibre-overlap index, during axial extension of ring-spun yarn. The actual length of fibre and the fibre extent in the yarn were found to be increased with the increase in yarn extension. With yarn extension from 0 to 4% the fibre strain in the yarn becomes moderate and further increase in yarn extension from 4 to 8% the fibre strain reduces, but with further increase in yarn extension of 8-12% the fibre strain again increases. It has also been observed that the fibre straightening percentage at different intervals of yarn extension is not the same and it decreases with the increase in yarn extension. The fibre slippage percentage is also not the same at different intervals of yarn extension percentage. It is found to be maximum at 4-8% and minimum at 0-4% yarn extension.
引用
收藏
页码:836 / 843
页数:8
相关论文
共 13 条
[1]   Failure mechanism in staple yarns [J].
Cybulska, M ;
Goswami, BC ;
MacAlister, D .
TEXTILE RESEARCH JOURNAL, 2001, 71 (12) :1087-1094
[2]   Analysis of spun yarn failure. Part I: Tensile failure of yarns as a function of structure and testing parameters [J].
Ghosh, A ;
Ishtiaque, SM ;
Rengasamy, RS .
TEXTILE RESEARCH JOURNAL, 2005, 75 (10) :731-740
[3]  
Gulati A.N., 1930, J TEXT I, V21, pT561
[4]  
Hearle J.W. S., 1969, STRUCTURAL MECH FIBR
[5]   Analysis of spinning process using the Taguchi method. Part II: Effect of spinning process variables on fibre extent and fibre overlap in ring, rotor and air-jet yarns [J].
Ishtiaque, S. M. ;
Salhotra, K. R. ;
Kumar, A. .
JOURNAL OF THE TEXTILE INSTITUTE, 2006, 97 (04) :285-293
[6]   Development of image processing based system to study yarn structure during extension [J].
Ishtiaque, S. M. ;
Kumar, A. ;
Das, A. ;
Tholeti, P. B. .
JOURNAL OF THE TEXTILE INSTITUTE, 2010, 101 (08) :687-698
[7]  
Ishtiaque S M, 1986, INDIAN J FIBRE TEXT, V11, P208
[8]  
KOHLER S, 1934, J TEXT I, V25, pT141
[9]  
Kumar A., 2011, J TEXTILE I IN PRESS
[10]   A comprehensive stress and breakage analysis of staple fiber yarns .2. Breakage analysis of single staple fiber yarns [J].
Onder, E ;
Baser, G .
TEXTILE RESEARCH JOURNAL, 1996, 66 (10) :634-640