INFLUENCE OF PLASTIC DEFORMATION DURING EXTRUSION PROCESS ON HEAT RESISTANCE ALLOYS Fe40Al

被引：1
作者：
Pasek, D. [1 ]
Cebulski, J. [1 ]
机构：
[1] Silesian Tech Univ, Dept Mat Engn & Met, 8 Krasinskiego Str, PL-40019 Katowice, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2017年 / 62卷 / 04期
关键词：
corrosion resistance; plastic deformation; alloys intermetallic phase matrix FeAl; Al2O3; extrusion; IRON ALUMINIDE; OXIDATION; MICROSTRUCTURE; FEAL;
D O I：
10.1515/amm-2017-0336
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The article presents the results of studies on the effects wrought on the corrosion resistance of the alloy matrix phase intermetallic FeAl. Researches were carried out on the Fe40Al5Cr0.2TiB alloy and involved the oxidation of the samples after the crystallization after plastic deformation made by extrusion. The tests were performed in an oven in air at 1100 degrees C for 100, 300 and 500 h. Determined to change the mass of the samples after corrosion research setting kinetics of corrosion processes, as well as an analysis of the microstructure of the alloy after the crystallization and after forming. The structure was examined using light microscopy and scanning electron microscopy and X-ray microanalysis with EDS chemical composition of the corrosion products. The test results revealed that plastic deformation during extrusion of intermetallic alloy led to structural changes, the effect of which was to improve the heat resistance at a temperature of 1100 degrees C.
引用
收藏
页码：2281 / 2286
页数：6
相关论文
共 50 条
[11]   EVOLUTION OF MICROSTRUCTURE OF COPPER AND ITS ALLOYS DURING SEVERE PLASTIC DEFORMATION PROCESS [J].
Volokitin, A. V. ;
Denissova, A. I. ;
Fedorova, T. D. ;
Lavrinuk, D. N. .
USPEKHI FIZIKI METALLOV-PROGRESS IN PHYSICS OF METALS, 2024, 25 (02) :294-319
[12]   The influence of processing route on the plastic deformation of Al-Zn-Mg-Cu alloys [J].
Málek, P ;
Cieslar, M .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 324 (1-2) :90-95
[13]   Anisotropic plastic deformation of polycrystalline Fe3Al during high-temperature oxidation [J].
Kim, IS ;
Cho, WD .
MATERIALS LETTERS, 1999, 40 (03) :124-128
[14]   Heat Treatment Influence on the Corrosion Resistance of a Cu-Al-Fe-Mn Bronze [J].
Ciurdas, Mariana ;
Gherghescu, Ioana Arina ;
Ciuca, Sorin ;
Necsulescu, Alina Daniela ;
Cotrut, Cosmin ;
Dumitrescu, Ruxandra Elena .
REVISTA DE CHIMIE, 2018, 69 (05) :1055-1059
[15]   MODEL OF HOT DEFORMATION RESISTANCE OF THE IRON ALUMINIDE OF THE TYPE FE-40AT.%Al [J].
Kawulok, Rostislav ;
Opela, Petr ;
Schindler, Ivo ;
Kawulok, Petr .
METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, :444-449
[16]   A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys [J].
Gupta, Aman ;
Khatirkar, Rajesh ;
Singh, Jaiveer .
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 899
[17]   Influence of die geometric parameters on plastic flow of layer composites during extrusion process [J].
Nowotynska, Irena ;
Smykla, Andrzej .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (04) :1943-1949
[18]   Novel process combined extrusion and severe plastic deformation for plate component with rib-web structure of magnesium alloys [J].
Nanyang Zhu ;
Chaoyang Sun ;
Lingyun Qian ;
Mingjia Wang ;
Xintong Li .
The International Journal of Advanced Manufacturing Technology, 2022, 119 :3647-3658
[19]   Corrosion resistance of model ultrafine-grained Al–Li alloys produced by severe plastic deformation [J].
Łukasz Dolega ;
Bogusława Adamczyk-Cieślak ;
Jarosław Mizera ;
Krzysztof Jan Kurzydłowski .
Journal of Materials Science, 2012, 47 :3026-3033
[20]   INFLUENCE OF THE DEFORMATION AND HEAT TREATMENT OF (α+β)-TITANIUM ALLOYS VT6 AND VT22 ON THEIR CORROSION RESISTANCE [J].
Abramova, Polina V. ;
Naydenkin, Evgeny V. ;
Ratochka, Ilya V. ;
Mishin, Ivan P. ;
Kovaleva, Svetlana V. ;
Korshunov, Andrey V. .
BULLETIN OF THE TOMSK POLYTECHNIC UNIVERSITY-GEO ASSETS ENGINEERING, 2023, 334 (04) :89-102
12345