Non-isothermal modeling of the flue gas desulphurization process using a semi-dry spouted bed reactor

被引：21

作者：

Rahimi, Amir ^{[1
]}

Hatamipour, Mohammad Sadegh ^{[1
]}

Gholami, Mohsen ^{[1
]}

Haghnegandar, Mohammad Reza ^{[1
]}

机构：

[1] Univ Isfahan, Dept Chem Engn, Coll Engn, Esfahan, Iran

来源：

CHEMICAL ENGINEERING RESEARCH & DESIGN | 2011年 / 89卷 / 6A期

关键词：

Modeling; Powder particle spouted bed; FGD; Stream tube; Non-isothermal; PARTICLE CIRCULATION RATES; COARSE PARTICLES; FGD PROCESS; SO2; REMOVAL; PREDICTION;

D O I：

10.1016/j.cherd.2010.08.014

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A mathematical model is developed for investigation of SO2 removal in a powder particle spouted bed (PPSB) for non-isothermal operating condition. For this aim, the stream-tube model which was already validated for such systems is applied for hydrodynamics of solid and gas phases, and then by using the conservation laws of mass and energy, the governing equations for gas and solid phases are derived and solved numerically. The published experimental data in the literature are used to validate the accuracy of the proposed model. The results show that the model is capable of predicting the behaviour of this system properly. Also the optimum performance of this system is investigated by studying the effects of different parameters such as bed height, molar ratio of sorbent to acid gas (Ca/S) and inlet concentration of SO2. (C) 2010 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

引用

页码：777 / 784

页数：8

共 23 条

[21]

Treybal R.E., 1981, MASS TRANSFER OPERAT, V3rd

[22] HYDRODYNAMICS OF SPOUTED BEDS AT ELEVATED-TEMPERATURES [J].

WU, SWM ;

LIM, CJ ;

EPSTEIN, N .

CHEMICAL ENGINEERING COMMUNICATIONS, 1987, 62 (1-6) :251-268

[23] A new semi-dry desulfurization process using a powder-particle spouted bed [J].

Xu, GW ;

Guo, QM ;

Kaneko, T ;

Kato, K .

ADVANCES IN ENVIRONMENTAL RESEARCH, 2000, 4 (01) :9-18

← 1 2 3 →