The Effect of Aluminum Oxide (Al2O3) and Cerium Oxide (CeO2) on the Structural and Mechanical Properties of Yttria Tetragonal Zirconia Polycrystal (Y-TZP)

被引：0
|
作者：
Golieskardi, M. [1 ]
Satgunam, M. [1 ]
Ragurajan, D. [1 ]
Ansari, M. N. M. [1 ]
机构：
[1] Univ Tenaga Nas, Ctr Adv Mat, Kajang 43000, Selangor, Malaysia
来源：
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY | 2015年 / 51卷 / 01期
关键词：
Aluminum Oxide; Cerium Oxide; sintering behavior; Y-TZP; Mechanical Properties; LOW-TEMPERATURE DEGRADATION; BIOMEDICAL-GRADE ZIRCONIA; FRACTURE-RESISTANCE; CERAMICS; TRANSFORMATION; WATER; AIR;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of additions of Al2O3 and CeO2 (up to 1 wt %) on the sintering behavior of yttria-stabilized Tetragonal Zirconia Polycrystals (Y-TZP) were studied. The effects of Al2O3 and CeO2 on the Vickers hardness, bulk density, fracture toughness and Young's modulus were carried out on the sintered samples. The sintering temperature was ranging from 1250 degrees C to 1450 degrees C with the ramp rate of 10 degrees C/min. The results revealed that the doped samples demonstrated a stronger effect in contrast with the undoped samples. The relative densities were above 97.5 % of theoretical (i.e. > 6.1 gcm(-3)) could be obtained in Y-TZPs sintered at low temperatures, 1350 degrees C. The hardness's value of Y-TZP was increased in the 1 wt % Al2O3 and CeO2-doped samples when sintered above 1400 degrees C.
引用
收藏
页码：16 / 21
页数：6
相关论文
共 50 条
  • [21] Preparation of crystal-controlled Y-TZP/Al2O3 nanocomposites
    Fang, Y.
    Zhang, Y.
    Hu, L.
    MATERIALS SCIENCE-POLAND, 2012, 30 (04): : 348 - 354
  • [22] Mechanical properties and microstructure of (CeO2)-stabilised ZrO2/Al2O3 composites
    Maschio, S
    Sbaizero, O
    Meriani, S
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 1995, 10 (3-6) : 419 - 427
  • [23] Determination of mechanical properties of Al2O3/Y-TZP ceramic composites: Influence of testing method and residual stresses
    Fan, Kunyang
    Pastor, Jose Ygnacio
    Ruiz-Hervias, Jesus
    Gurauskis, Jonas
    Baudin, Carmen
    CERAMICS INTERNATIONAL, 2016, 42 (16) : 18700 - 18710
  • [24] Fabrication of complex-shaped Y-TZP/Al2O3 nanocomposites
    Zhang, Yongsheng
    Hu, Litian
    Chen, Jianmin
    Liu, Weimin
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (03) : 1533 - 1537
  • [25] Liquid phase sintering and microstructure of Y-TZP/Al2O3 composite
    Zhang, YF
    Guo, JK
    Huang, XX
    Li, BS
    JOURNAL OF INORGANIC MATERIALS, 1998, 13 (04) : 599 - 602
  • [26] Effect of the grain size on the wear resistance of Al2O3 dispersed Y-TZP ceramics
    Fan Xiaowei
    Liang Xiaoping
    Huai Xuguo
    Li Jianxin
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (03): : 328 - 330
  • [27] Mechanical properties and cytotoxicity of 3Y-TZP bioceramics reinforced with Al2O3 particles
    Santos, C.
    Teixeira, L. H. P.
    Daguano, J. K. M. F.
    Rogero, S. O.
    Strecker, K.
    Elias, C. N.
    CERAMICS INTERNATIONAL, 2009, 35 (02) : 709 - 718
  • [28] Neutron diffraction residual stress analysis of Al2O3/Y-TZP ceramic composites
    Fan, Kunyang
    Ruiz-Hervias, Jesus
    Gurauskis, Jonas
    Sanchez-Herencia, Antonio J.
    Baudin, Carmen
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2016, 55 (01): : 13 - 23
  • [29] Preparation and Characterization of Ceria Stabilized Tetragonal Zirconia Polycrystals(I) : Effect of CeO2 Contents on the Mechanical Properties of Ce-TZP
    Jung, Seung Hwa
    Kang, Jong Bong
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2010, 20 (07): : 379 - 384
  • [30] Effect of Fe2O3 doping on colour and mechanical properties of Y-TZP ceramics
    Holz, L.
    Macias, J.
    Vitorino, N.
    Fernandes, A. J. S.
    Costa, F. M.
    Almeida, M. M.
    CERAMICS INTERNATIONAL, 2018, 44 (15) : 17962 - 17971
12345