The Effect of Aluminum Oxide (Al2O3) and Cerium Oxide (CeO2) on the Structural and Mechanical Properties of Yttria Tetragonal Zirconia Polycrystal (Y-TZP)

被引：0

作者：

Golieskardi, M. ^{[1
]}

Satgunam, M. ^{[1
]}

Ragurajan, D. ^{[1
]}

Ansari, M. N. M. ^{[1
]}

机构：

[1] Univ Tenaga Nas, Ctr Adv Mat, Kajang 43000, Selangor, Malaysia

来源：

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY | 2015年 / 51卷 / 01期

关键词：

Aluminum Oxide; Cerium Oxide; sintering behavior; Y-TZP; Mechanical Properties; LOW-TEMPERATURE DEGRADATION; BIOMEDICAL-GRADE ZIRCONIA; FRACTURE-RESISTANCE; CERAMICS; TRANSFORMATION; WATER; AIR;

D O I：

暂无

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effect of additions of Al2O3 and CeO2 (up to 1 wt %) on the sintering behavior of yttria-stabilized Tetragonal Zirconia Polycrystals (Y-TZP) were studied. The effects of Al2O3 and CeO2 on the Vickers hardness, bulk density, fracture toughness and Young's modulus were carried out on the sintered samples. The sintering temperature was ranging from 1250 degrees C to 1450 degrees C with the ramp rate of 10 degrees C/min. The results revealed that the doped samples demonstrated a stronger effect in contrast with the undoped samples. The relative densities were above 97.5 % of theoretical (i.e. > 6.1 gcm(-3)) could be obtained in Y-TZPs sintered at low temperatures, 1350 degrees C. The hardness's value of Y-TZP was increased in the 1 wt % Al2O3 and CeO2-doped samples when sintered above 1400 degrees C.

引用

页码：16 / 21

页数：6

共 50 条

[1] The Effect of Aluminum Oxide (Al2O3) on the Mechanical and Microstructure Properties of Yttria Tetragonal Zirconia Polycrystal (Y-TZP) Ceramics
Ragurajan, D.
Satgunam, M.
Golieskardi, M.
Albakri, Ammar Adil
Ariffin, A. K.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2016, 52 (01) : 72 - 77
[2] Effect of Air Sintering on Microstructural and Mechanical Properties of Aluminum Oxide/Manganese Oxide Doped Y-TZP
Ragurajan, D.
Satgunam, M.
Golieskardi, M.
Ariffin, A. K.
Ghazali, M. J.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2016, 52 (02) : 128 - 133
[3] Mechanical properties of biocompatible Y-TZP/Al2O3 composites obtained from mechanically alloyed powders
de Freitas, Bruno Xavier
Pais Alves, Manuel Fellipe R.
Santos, Claudinei
Ramos, Alfeu Saraiva
Trindade Ramos, Erika Coaglia
Strecker, Kurt
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (07)
[4] HEATING AND SINTERING CHARACTERISTICS OF Y-TZP AND Y-TZP/Al2O3 BY MICROWAVE
施剑林
田永赉
李包顺
郭景坤
严东生
Science China Mathematics, 1992, (09) : 1144 - 1152
[5] HEATING AND SINTERING CHARACTERISTICS OF Y-TZP AND Y-TZP/AL2O3 BY MICROWAVE
SHI, JL
TIAN, YL
LI, BS
GUO, JK
YAN, DS
SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY, 1992, 35 (09): : 1144 - 1152
[6] Differences in microstructure and mechanical properties between Y-TZP and AL2O3-doped Y-TZP/bioglass ceramics
Soubelet, Clara G.
Albano, Maria P.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2021, 18 (06) : 2237 - 2249
[7] Effects of CuO and Al2O3 additions on the tetragonal phase stability in 2.5 mol% Y-TZP ceramics
Singh, R
Gill, C
Lawson, S
PROCESSING AND FABRICATION OF ADVANCED MATERIALS VI, VOLS 1 & 2, 1998, : 785 - 796
[8] Microwave sintering and mechanical properties of Y-TZP/20 wt.% Al2O3 composites
Travitzky, NA
Goldstein, A
Avsian, O
Singurindi, A
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 286 (02): : 225 - 229
[9] Mechanical properties of Y2O3/Al2O3-coated Y-TZP ceramics
Vleugels, J
Yuan, ZX
Van Der Biest, O
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (06) : 873 - 881
[10] Effect of micro-alumina content on mechanical properties of Al2O3/3Y-TZP composites
Zhang, Fan
Li, Liang-feng
Wang, En-ze
CERAMICS INTERNATIONAL, 2015, 41 (09) : 12417 - 12425

← 1 2 3 4 5 →