Martensitic transformation and the stress induced by 3 MeV ion implantation in an austenite stainless steel sheet

被引:10
作者
Wang, Q [1 ]
Ogiso, H
Nakano, S
Akedo, J
Ishikawa, H
机构
[1] Univ Electrocommun, Dept Mech Engn & Intelligent Syst, Chofu, Tokyo 1828585, Japan
[2] AIST, Inst Mech Syst Engn, Process Mech Grp, Tsukuba, Ibaraki 3058564, Japan
关键词
ion implantation; XRD; residual stress; martensitic transformation;
D O I
10.1016/S0168-583X(03)00696-7
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
Investigations were carried out on the relation between the martensite transformation and the stress induced by 3 MeV ion implantation in an austenite stainless steel (SS) sheet. Gold ions were implanted into the austenite SS sheet and the implantation dose was varied between 1 x 10(16)/cm(2) and 3 x 10(16)/cm(2). The microstructures in the ion-implanted region were examined by using transmission electron microscopy equipped with an energy dispersive X-ray spectrometer. The depth profile of the martensite volume fraction in the ion-implanted region was obtained by using a modified version of the direction comparison method, and the residual stress in the ion-implanted layer was measured by a low incident beam angle X-ray diffraction method. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:118 / 122
页数:5
相关论文
共 12 条
  • [1] EFFECT OF HIGH-DOSE N-2+ ION-IMPLANTATION ON SURFACE CHARACTERISTICS OF AISI-302 STAINLESS-STEEL WITH AND WITHOUT AN INDUCING STRAIN
    AGGARWAL, S
    GOEL, AK
    MOHINDRA, RK
    GHOSH, PK
    CHAND, A
    [J]. THIN SOLID FILMS, 1993, 223 (01) : 72 - 77
  • [2] PHASE-TRANSFORMATION OF AUSTENITIC STAINLESS-STEELS AS A RESULT OF CATHODIC HYDROGEN CHARGING
    BENTLEY, AP
    SMITH, GC
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (09): : 1593 - 1600
  • [3] TEM CHARACTERIZATION OF A NITROGEN IMPLANTED AUSTENITIC STAINLESS-STEEL
    FAYEULLE, S
    TREHEUX, D
    ESNOUF, C
    [J]. APPLIED SURFACE SCIENCE, 1986, 25 (03) : 288 - 304
  • [4] Thickness dependent phase transformations in implanted iron layers
    Jagielski, J
    Kopcewicz, M
    Gawlik, G
    Matz, W
    Thomé, L
    [J]. JOURNAL OF APPLIED PHYSICS, 2002, 91 (10) : 6465 - 6470
  • [5] DEPTH DISTRIBUTION OF MARTENSITE IN XENON-IMPLANTED STAINLESS-STEELS
    JOHANSEN, A
    JOHNSON, E
    SARHOLTKRISTENSEN, L
    STEENSTRUP, S
    GERRITSEN, E
    DENISSEN, CJM
    KEETELS, H
    POLITIEK, J
    HAYASHI, N
    SAKAMOTO, I
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1990, 50 (1-4) : 119 - 126
  • [6] MARTENSITE-TRANSFORMATION IN ANTIMONY IMPLANTED STAINLESS-STEEL
    JOHNSON, E
    LITTMARK, U
    JOHANSEN, A
    CHRISTODOULIDES, C
    [J]. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1982, 45 (05): : 803 - 821
  • [7] MOSSBAUER AND TEM STUDY OF MARTENSITIC TRANSFORMATIONS IN ION-IMPLANTED 17/7 STAINLESS-STEEL
    JOHNSON, E
    JOHANSEN, A
    SARHOLTKRISTENSEN, L
    GRAABAEK, L
    HAYASHI, N
    SAKAMOTO, I
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1987, 19-20 : 171 - 176
  • [8] MULTIPLE LOW ANGLES OF INCIDENCE X-RAY-DIFFRACTION METHOD FOR NONDESTRUCTIVELY DETERMINING THE DEPTH-DEPENDENT FRACTION OF A PHASE IN THE SURFACE-LAYER
    MIZUTANI, K
    MURATA, K
    TANAKA, Y
    [J]. JOURNAL OF APPLIED PHYSICS, 1994, 76 (06) : 3511 - 3515
  • [9] X-RAY RESIDUAL-STRESS MEASUREMENT IN TIN, ZRN AND HFN FILMS USING THE SEEMANN-BOHLIN METHOD
    PERRY, AJ
    VALVODA, V
    RAFAJA, D
    [J]. THIN SOLID FILMS, 1992, 214 (02) : 169 - 174
  • [10] ION-INDUCED PHASE-TRANSFORMATION IN TYPE-304 AUSTENITIC STAINLESS-STEEL BY RARE-GAS ION IRRADIATION
    SAKAMOTO, I
    HAYASHI, N
    FURUBAYASHI, B
    TANOUE, H
    [J]. JOURNAL OF APPLIED PHYSICS, 1990, 68 (09) : 4508 - 4512