Study on the load distribution of ball screws with errors

被引：106

作者：

Mei, XS ^{[1
]}

Tsutsumi, M

Tao, T

Sun, NG

机构：

[1] Xian Jiaotong Univ, Dept Mech Engn, Xian 710049, Peoples R China

[2] Tokyo Univ Agr & Technol, Tokyo 1848858, Japan

来源：

MECHANISM AND MACHINE THEORY | 2003年 / 38卷 / 11期

基金：

中国国家自然科学基金;

关键词：

ball screw; error; correction; random error; load;

D O I：

10.1016/S0094-114X(03)00070-3

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A model is developed to analyze the load distribution of ball screws with geometry errors. The load distribution of the contact of the balls and grooves is theoretically investigated under various load conditions. The results demonstrate that the negative geometry errors of the ball screw result in the decrease of the load on balls or guiding grooves, and when the negative errors reach certain value there is no contact between the balls and the groove. On the other hand, if geometry errors of the ball screw are positive, the load increases. If the error heights are assumed to be a normally random distribution, the load distribution without geometry error is the average value of that in random error. It is valuable for equilibrating the load distribution to correct nut grooves. The simulation results show that the model proposed in this paper is significant to the Study of the characteristics of ball screws with regard of geometry errors. (C) 2003 Elsevier Ltd. All rights reserved.

引用

页码：1257 / 1269

页数：13

共 8 条

[1] Analytical and experimental identification of nonlinearities in a single-nut, preloaded ball screw [J].

Cuttino, JF ;

Dow, TA ;

Knight, BF .

JOURNAL OF MECHANICAL DESIGN, 1997, 119 (01) :15-19

[2]

HILDEBRANDT HJ, 1981, BALL SCREW TECHNOLOG, V221, P543

[3] Contact stress analysis in ball screw mechanism using the tubular medial axis representation of contacting surfaces [J].

Huang, HTT ;

Ravani, B .

JOURNAL OF MECHANICAL DESIGN, 1997, 119 (01) :8-14

[4]

Igarashi Y., 1995, T JAPAN SOC MECH ENG, V588, P3369

[5]

Izawa M., 1976, J JPN SOC PRECIS ENG, V42, P1021

[6] KINEMATICS OF THE BALL SCREW MECHANISM [J].

LIN, MC ;

RAVANI, B ;

VELINSKY, SA .

JOURNAL OF MECHANICAL DESIGN, 1994, 116 (03) :849-855

[7]

NAKASHIMA K, 1987, JSME INT J C-DYN CON, V54, P2181

[8]

Shimoda H., 1998, J JPN SOC PRECIS ENG, V64, P1581

← 1 →