Microstructure evolution and mechanical properties of (Ti0.93W0.07)C-xWC-20Ni cermets

被引：30

作者：

Kim, Jiwoong ^{[1
]}

Kang, Shinhoo ^{[1
]}

机构：

[1] Seoul Natl Univ, Dept Mat Sci & Engn, Seoul 151742, South Korea

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 528卷 / 7-8期

关键词：

Solid-solution carbide; Cermets; Phase stability; Mechanical properties; FRACTURE-TOUGHNESS; PHASE; DISSOLUTION; HARDMETALS; CARBIDES; POWDERS; SIZE; TI(C; (TI;

D O I：

10.1016/j.msea.2010.12.038

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The microstructure and mechanical properties of (Ti0.93W0.07)C-xWC-20Ni cermets were investigated to determine the effect of WC addition on the Ti-based solid solution cermet, (Ti0.93W0.07)C-20Ni. (Ti0.93W0.07)C-20Ni exhibited a homogeneous microstructure with no core-rim structure; however, a core-rim structure was observed with the addition of WC. The carbide size decreased sharply with the addition of 15 wt.% WC. After composition, very small coreless carbide (VSCC) particles abruptly emerged in the microstructure. These particles might be formed by homogeneous nucleation during the final stage of sintering and cooling after the outer rim formation period. With increasing WC addition, the hardness remained constant, whereas the toughness decreased. Compared with Ti(CN)-based cermets with similar compositions, the hardness and toughness of (Ti0.93W0.07)C-xWC-20Ni cermets exhibited higher values. The refined microstructure of Ti-based solid solution cermets is considered to be responsible for the superior mechanical properties. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：3090 / 3095

页数：6

共 50 条

[41] Effect of WC-Co granules on mechanical properties and microstructure of Ti(C,N)-based cermets
Liu, Aijun
Liu, Ning
CERAMICS INTERNATIONAL, 2016, 42 (14) : 15274 - 15284
[42] Mechanical and magnetic properties of (Ti,W)C-xCoCrFeNiMo cermets sintered at different sintering temperatures
Xu, Guangtao
Yao, Zhenhua
Zhang, Man
Huang, Yingying
Chen, Yucong
Liu, Weikang
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 107
[43] Effect of WC on the microstructure and mechanical properties in the Ti(C0.7N0.3)-xWC-Mo2C-(Co, Ni) system
Wang Jun
Liu Ying
Zhang Ping
Peng Jiancai
Ye Jinwen
Tu Minjing
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (01) : 9 - 13
[44] Effects of NiTi additions on the microstructure and mechanical properties of Ti(C,N)-based cermets
Li, Qilong
Liu, Ning
Liu, Aijun
Zhang, Hongliang
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 40 : 43 - 50
[45] Microstructure and mechanical properties of WC or Mo2C modified NbC-Ni cermets
Huang, J. H.
Huang, S. G.
Zhou, P.
Lauwers, B.
Qian, J.
Vleugels, J.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 95
[46] Effect of sintering temperature on the microstructure and mechanical properties of Ti(C, N)-based cermets
Yonglin Yan
Yong Zheng
Haijun Yu
Haijian Bu
Xin Cheng
Nengwei Zhao
Powder Metallurgy and Metal Ceramics, 2007, 46 : 449 - 453
[47] Effect of sintering temperature on the microstructure and mechanical properties of Ti(C, N)-based cermets
Yan, Yonglin
Zheng, Yong
Yu, Haijun
Bu, Haijian
Cheng, Xin
Zhao, Nengwei
POWDER METALLURGY AND METAL CERAMICS, 2007, 46 (9-10) : 449 - 453
[48] Effect of powder size on microstructure and mechanical properties of Ti(C,N) based cermets
Liu, N.
Zhou, J.
Zhang, X. B.
Rong, C. L.
ADVANCES IN APPLIED CERAMICS, 2007, 106 (05) : 247 - 254
[49] Effect of Ni Contents on Microstructures and Mechanical Properties for (Ti0.8Mo0.2)C-Ni Cermets
Hosokawa, Hiroyuki
Katou, Kiyotaka
Shimojima, Koji
Furushima, Ryoichi
Matsumoto, Akihiro
MATERIALS TRANSACTIONS, 2014, 55 (09) : 1451 - 1454
[50] Influence of Mo contents on microstructures and mechanical properties of (Ti,W,Mo)(CN)-Ni cermets
Kim, Jae-Hee
Kim, Yongseon
CERAMICS INTERNATIONAL, 2019, 45 (05) : 5361 - 5366

← 1 2 3 4 5 →