The shapes of cold, high mountains in sedimentary rocks

Terzaghi (Geotechnique 12 (1962) 251) and Young (Young, A., 1972. Slopes. Oliver and Boyd, Edinburgh, 288 pp.) described the stable forms of slopes in sedimentary rock masses, assuming penetrative discontinuities, which are parallel to bedding and joints which are perpendicular to bedding. The only movements considered were slides along bedding. Experience in the Canadian Rockies indicates that the cohesionless rock masses that exist at or above tree line may also move by toppling, buckling and sliding along joints. These processes also act to limit the inclinations of stable slopes. Rock strength is a factor in the critical height of a slope that buckles. The processes can be represented as fields on a process diagram, a plot of slope inclination against bedding dip, using the basic friction angles of the rocks present. The process diagram also separates five common mountain peak shapes, which form on homoclinal sequences of beds. Castellate and Matterhorn mountains occur in sub-horizontal beds, cuestas develop in gently to moderately dipping beds. Hogbacks formed in moderately to steeply dipping beds have similar slope angles on both cataclinal and anaclinal slopes. Dogtooth mountains occur in steeply dipping sub-vertical beds. (C) 2003 Elsevier Science B.V All rights reserved.