MONITORING OF MATERIAL SURFACE POLISHING PROCEDURE USING CONFOCAL MICROSCOPE

被引：0

作者：

Dudikova, Michaela ^{[1
]}

Kytyr, Daniel ^{[2
]}

Doktor, Tomas ^{[2
]}

Jirousek, Ondrej ^{[2
]}

机构：

[1] Czech Tech Univ, Klokner Inst, Prague 16608 6, Czech Republic

[2] Acad Sci Czech Republic, Inst Theoret & Appl Mech, Prague 19000 9, Czech Republic

来源：

CHEMICKE LISTY | 2011年 / 105卷

关键词：

roughness reduction; sample preparation; confocal microscope; surface roughness criteria;

D O I：

暂无

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Article deals with monitoring and optimization of roughness reduction procedure used for preparation of samples for nanoindentation tests. The aim of the research was to measure roughness reduction effect of various combination of grind-stones, polishing time, pressure and speed. Suitable procedure with respect to time and cost for three different materials was proposed. For porous materials trabecular bone was chosen, fibre composite as and asbestos-free plates compact ones. Roughness measurement was performed by contactless method using a confocal microscope. Number of grinding steps was reduced and optimal forces and times of grinding were estimated.

引用

页码：S790 / S791

页数：2