Air Permeation Rate of Oriented Strand Boards (OSB/3 and OSB/4)

被引：0

作者：

Hodousek, Matej ^{[1
]}

Boehm, Martin ^{[1
]}

Lemaster, Richard L. ^{[2
]}

Bures, Miroslav ^{[1
]}

Berankova, Jitka ^{[1
]}

Cvach, Jiri ^{[1
]}

机构：

[1] Czech Univ Life Sci Prague, Dept Wood Prod & Wood Construct, Prague 16521, Czech Republic

[2] N Carolina State Univ, Coll Nat Resources, Dept Forest Biomat, Raleigh, NC 27695 USA

来源：

BIORESOURCES | 2015年 / 10卷 / 01期

关键词：

Air permeation rate; Air permeability; Air tightness; OSB; Thickness; EN; 12114; DENSITY; HEAT;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

Measurements of air permeation rate were taken according to EN 12114 for OSB boards, which were manufactured for this purpose in accordance with the requirements of EN 300 by a commercial manufacturer. The study measured the air permeation rate of samples and evaluated the influence of selected parameters on the resulting values. The effects of these factors on the rate of air permeation were specified, showing the particular influences of board thickness (12 mm and 18 mm) and type (OSB/3 and OSB/4). The dependence of the measured values of air permeation rate on the pressure difference was described using linear equations within a regression analysis. The group of OSB/3 samples exhibited a lower resistance to air permeation than OSB/4 (about 61% for both thicknesses). In addition, in both groups, 18 mm samples showed a higher resistance to air permeation than samples with a thickness of 12 mm (OSB/3 by about 40% and OSB/4 by about 41%).

引用

页码：1137 / 1148

页数：12

共 50 条

[1] SHEAR AND BENDING PROPERTIES OF STRUCTURAL ORIENTED STRAND BOARDS OSB/4
Plenzler, Ryszard
Ludwiczak-Niewiadomska, Lidia
Mielcarek, Piotr
WOOD RESEARCH, 2013, 58 (02) : 285 - 294
[2] Shear and bending properties of structural oriented strand boards OSB/4
Plenzler, R. (rplenzle@up.poznan.pl), 2013, Pulp and Paper Research Institute (58)
[3] Biodegradation of terpenes for emission-reduced oriented strand boards (OSB)
Widhalm, Bernhard
Rieder-Gradinger, Cornelia
Kuncinger, Thomas
Srebotnik, Ewald
HOLZFORSCHUNG, 2017, 71 (03) : 259 - 264
[4] Medium density fibre boards (MDF) from recovered oriented strand boards (OSB)
Schoo, A
Roffael, E
Uhde, M
HOLZ ALS ROH-UND WERKSTOFF, 2003, 61 (05) : 390 - 391
[5] TESTING THE PROPERTIES OF ORIENTED STRUCTURAL BOARDS (OSB)
BRUCI, V
MAMIC, F
HOLZ ALS ROH-UND WERKSTOFF, 1987, 45 (03) : 110 - 110
[6] ALTERNATIVE COMPOSITIONS OF ORIENTED STRAND BOARDS (OSB) MADE WITH COMMERCIAL WOODS PRODUCED IN BRAZIL
Bufalino, Lina
Ribeiro Correa, Andrea Aparecida
de Sa, Vania Aparecida
Mendes, Lourival Marin
Almeida, Natalia Amarante
Pizzol, Vinnicius Dordenoni
MADERAS-CIENCIA Y TECNOLOGIA, 2015, 17 (01): : 105 - 116
[7] EFFECTS OF PARTICLES THICKNESS AND VENEER REIFORCED LAYER IN THE PROPERTIES OF ORIENTED STRAND BOARDS - OSB
Iwakiri, Setsuo
Saldanha, Leopoldo Karman
Camargo de Albuquerque, Carlos Eduardo
Mendes, Lourival Marin
CERNE, 2009, 15 (01) : 116 - 122
[8] Life Cycle Assessment of Oriented Strand Boards (OSB): from Process Innovation to Ecodesign
Benetto, Enrico
Becker, Marko
Welfring, Joelle
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2009, 43 (15) : 6003 - 6009
[9] OPTIMAL ORIENTATION OF FLAKES IN ORIENTED STRAND BOARD (OSB)
SHARMA, V
SHARON, A
EXPERIMENTAL MECHANICS, 1993, 33 (02) : 91 - 98
[10] ORIENTED STRUCTURAL BOARDS (OSB), THEIR PROPERTIES, APPLICATION AND MANUFACTURE
BRINKMANN, E
HOLZ ALS ROH-UND WERKSTOFF, 1979, 37 (04) : 139 - 142

← 1 2 3 4 5 →