Metallization of Epitaxial VO2 Films by Ionic Liquid Gating through Initially Insulating TiO2 Layers

Ionic liquid gating has been shown to metallize initially insulating layers formed from several different oxide materials. Of these vanadium dioxide (VO2) is of especial interest because it itself is metallic at temperatures above its metal-insulator transition. Recent studies have shown that the mechanism of ionic liquid gated induced metallization is entirely distinct from that of the thermally driven metal-insulator transition and is derived from oxygen migration through volume channels along the (001) direction of the rutile structure of VO2. Here we show that it is possible to metallize the entire volume of 10 nm thick layers of VO2 buried under layers of rutile titanium dioxide (TiO2) up to 10 nm thick. Key to this process is the alignment of volume channels in the respective oxide layers, which have the same rutile structure with clamped in-plane lattice constants. The metallization of the VO2 layers is accompanied by large structural expansions of up to similar to 6.5% in the out-of-plane direction, but the structure of the TiO2 layer is hardly affected by gating. The TiO2 layers become weakly conducting during the gating process, but in contrast to the VO2 layers, the conductivity disappears on exposure to air. Indeed, even after air exposure, X-ray photoelectron spectroscopy studies show that the VO2 films have a reduced oxygen content after metallization. Ionic liquid gating of the VO2 films through initially insulating TiO2 layers is not consistent with conventional models that have assumed the gate induced carriers are of electrostatic origin.