Productivity Improvement in Manufacturing Systems Through TPM, OEE and Collaboration Between Maintenance and Production: A Case Study

被引:1
作者
Costa, Rui [1 ]
Lopes, Isabel [2 ]
机构
[1] Univ Minho, Dept Prod & Syst, Sch Engn, Campus Azurem, P-4800058 Guimaraes, Portugal
[2] Univ Minho, Sch Engn, ALGORITMI Res Ctr, Campus Azurem, P-4800058 Guimaraes, Portugal
来源
ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: ARTIFICIAL INTELLIGENCE FOR SUSTAINABLE AND RESILIENT PRODUCTION SYSTEMS, PT V | 2021年 / 634卷
关键词
Collaboration; Data management; OEE; Quality management; TPM;
D O I
10.1007/978-3-030-85914-5_28
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The following paper describes a project where Total Productive Maintenance (TPM) methodology was used in order to improve an automotive industry production line availability and quality. After performing a diagnosis, major flaws were revealed about maintenance and production communication, as well as missing information about the production of defects and maintenance interventions. It was necessary to solve these problems before being able to analyse production inefficiencies, define and implement improvement actions. This project showed the significant impact on costs and quality that can be achieved using TPM, OEE and collaboration between production and maintenance. But beyond that, it showed that despite the industry 4.0 being on the agenda, there is a low use of communication technologies and, therefore, significant gains can still be achieved through basic analysis of recorded data if they are properly organized and standardized. It appears that special attention must be paid to the collection of data, to ensure its proper use for decision making.
引用
收藏
页码:261 / 268
页数:8
相关论文
共 7 条
[1]   Total productive maintenance: literature review and directions [J].
Ahuja, I. P. S. ;
Khamba, J. S. .
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT, 2008, 25 (07) :709-+
[2]  
Bastos P, 2014, SAFETY, RELIABILITY AND RISK ANALYSIS: BEYOND THE HORIZON, P933
[3]  
Bastos P, 2012, P WORLD C ENG
[4]  
Hall R.W, 2004, LEAN TOYOTA PRODUCTI, V20, P22
[5]   Manufacturing productivity improvement using effectiveness metrics and simulation analysis [J].
Huang, SH ;
Dismukes, JP ;
Shi, J ;
Su, Q ;
Razzak, MA ;
Bodhale, R ;
Robinson, DE .
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2003, 41 (03) :513-527
[6]  
Rajput H.S., 2012, TOTAL PRODUCTIVE MAI, V2, P4383
[7]  
Vashisth D S., 2011, International Journal of Engineering Science and Technology, V3, P8247