A Novel PM-Free High-Speed Linear Machine With Amorphous Primary Core

被引:15
|
作者
Ou, Jing [1 ]
Liu, Yingzhen [1 ]
Schiefer, Markus [1 ]
Doppelbauer, Martin [1 ]
机构
[1] Karlsruhe Inst Technol, D-76131 Karlsruhe, Germany
关键词
Amorphous core; flux-modulated; high speed; linear machine; MOTOR; PERFORMANCE;
D O I
10.1109/TMAG.2017.2701152
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper proposes a novel dc-excited flux-modulated linear machine with a new primary structure for utilizing amorphous core. Although amorphous core is regarded as a good candidate in highly efficient electric machines, and is being investigated for decades, it has not been widely used in electric machines yet. The key challenge is the difficulty in slotting. For the new structure, the difficulty in slotting is avoided. Furthermore, the proposed machine is economical and has a robust double salient structure without any permanent magnets, and both single-toothed field and armature windings are located together in the primary core. By regulating the field excitation, the machine can operate at a wide speed range. Due to the low loss of amorphous core, this machine shows high efficiency at high speed.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] A High-Speed, High-Frequency, Air-Core PM Machine for Aircraft Application
    Yoon, Andy
    Yi, Xuan
    Martin, Jon
    Chen, Yuanshan
    Haran, Kiruba
    2016 IEEE POWER AND ENERGY CONFERENCE AT ILLINOIS (PECI), 2016,
  • [2] Modified Core Loss Calculation for High-Speed PMSMs With Amorphous Metal Stator Cores
    Tong, Wenming
    Li, Shiqi
    Sun, Ruolan
    Sun, Lu
    Tang, Renyuan
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2021, 36 (01) : 560 - 569
  • [3] Experimental Study of the Amorphous Magnetic Material for High-Speed Sleeve-Free PM Rotor Application
    Ou, Jing
    Liu, Yingzhen
    Breining, Patrick
    Schiefer, Markus
    Doppelbauer, Martin
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (06) : 4422 - 4432
  • [4] A PM-Free Brushless Synchronous Machine With a Novel Compensated Wound-Field Excited by Modulated Rotating Magnetic Flux
    Seyedi, S. Mehdi
    Talebi, Dorsa
    Toliyat, Hamid A.
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2024, 39 (03) : 2068 - 2080
  • [5] Design of the structure of the rotor containment sleeve for high-speed PM machine
    Lu, Binxian
    Dai, Nianqin
    Xu, Guorui
    Zhang, Shuang
    Yang, Junfeng
    2018 2ND IEEE CONFERENCE ON ENERGY INTERNET AND ENERGY SYSTEM INTEGRATION (EI2), 2018,
  • [6] The Strength Analysis of Rotor Sleeve and PM for High-speed Electrical Machine
    Ding, Hongchang
    Xiao, Linjing
    PRODUCT DESIGN AND MANUFACTURING, 2011, 338 : 477 - 480
  • [7] Research on End Effect of Linear Induction Machine for High-Speed Industrial Transportation
    Lu, Junyong
    Ma, Weiming
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2011, 39 (01) : 116 - 120
  • [8] Development of a high-speed permanent magnet machine using amorphous alloy cores
    Zhang Chao
    Tong Wenming
    Ma Xin
    Tang Renyuan
    Zhu Jianguo
    2016 IEEE VEHICLE POWER AND PROPULSION CONFERENCE (VPPC), 2016,
  • [9] A Novel Heteropolar Bearingless Slice Motor With a PM-Free Rotor for Centrifugal Blood Pump Applications
    He, Zeqiang
    Sugita, Naohiro
    Shinshi, Tadahiko
    IEEE ACCESS, 2023, 11 : 100114 - 100124
  • [10] Multi-objective optimization design of a high-speed PM machine supported by magnetic bearings
    Han, Bangcheng
    Xue, Qinghao
    Liu, Xu
    Wang, Kun
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, 92 : 349 - 363