Mechanical Properties and Morphology of UHMWPE/PC/HDPE-g-MAH Blends

被引：14
作者：
Wei, Xing [1 ]
Lu, Yafei [1 ]
Huang, Li [1 ]
机构：
[1] Beijing Univ Chem Technol, Key Lab Beijing City Preparat & Proc Novel Polyme, Beijing 100029, Peoples R China
来源：
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2011年 / 50卷 / 02期
关键词：
Blends; Compatibilizers; Morphology; Polycarbonate (PC); Ultrahigh molecular weight polyethylene (UHMWPE); MOLECULAR-WEIGHT POLYETHYLENE; PE-G-MA; TENSILE PROPERTIES; MALEIC-ANHYDRIDE; COMPATIBILIZATION; POLYPROPYLENE; EXTRUSION;
D O I：
10.1080/03602559.2010.531429
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
The blends of ultrahigh molecular weight polyethylene (UHMWPE), polycarbonate (PC) compatibilized by using a high-density polyethylene (HDPE) grafted with maleic anhydride (MAH), HDPE-g-MAH, were processed by melt extrusion. Two grafting degree of HDPE-g-MAH, 0.5% and 1.2%, were separately prepared by melt-graft and solution-graft methods. The grafting degree of HDPE-g-MAH shows a significant role in enhancing tensile strength of the blends. The compatibilization mechanism of HDPE-g-MAH in the blends analyzed by FTIR indicates that a new grafting product, HDPE-g-PC, was in situ formed. The improvement of phase interface between UHMWPE and PC by addition of HDPE-g-MAH was observed by SEM.
引用
收藏
页码：190 / 195
页数：6
相关论文
共 50 条
  • [21] Rheological properties of UHMWPE/HDPE blend gels and morphology and mechanical properties of gel-spun fibers
    Yang, Wenxiao
    Bin, Yuezhen
    Wang, Hai
    Ge, Zhonghui
    POLYMER ENGINEERING AND SCIENCE, 2021, 61 (07) : 2127 - 2136
  • [22] Rubber Toughened Polyamide 6/High Density Polyethylene/HDPE-g-MAH Nanocomposites with Ethylene Vinyl Acetate
    Hamid, Farizah
    Akhbar, Suffiyana
    Hamid, Ku K. H.
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II, 2014, 594-595 : 745 - 749
  • [23] Effect of polycarbonate (PC) content on the mechanical properties, morphology and transesterification mechanism of PBT/PC immiscible blends
    Mane, Prajakta
    Keche, Ashok J.
    Chopra, Swamini
    Pande, Kavita
    JOURNAL OF APPLIED POLYMER SCIENCE, 2024, 141 (36)
  • [24] HDPE/COC blends with fibrous morphology and their properties
    Vackova, Tatana
    Slouf, Miroslav
    Nevoralova, Martina
    Kapralkova, Ludmila
    EUROPEAN POLYMER JOURNAL, 2012, 48 (12) : 2031 - 2039
  • [25] Effect of EVOH on the morphology, mechanical and barrier properties of PA6/POE-g-MAH/EVOH ternary blends
    Wang, Biaobing
    Yang, Yang
    Guo, Weinan
    MATERIALS & DESIGN, 2012, 40 : 185 - 189
  • [26] Preparation and Properties of Wood Flour/HDPE Composites using C5-g-MAH as Compatilizer
    Cen Lan
    Chen Fu-lin
    Cao You-ming
    Chen Hui-xue
    MATERIALS, TRANSPORTATION AND ENVIRONMENTAL ENGINEERING, PTS 1 AND 2, 2013, 779-780 : 170 - 173
  • [27] STRESS-INDUCED FUNCTIONALIZED EPDM/HDPE AND ITS EFFECTS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PA66/EPDM/HDPE BLENDS
    Zhang Ling
    Zhang Yuncan
    Yao Huqing
    ACTA POLYMERICA SINICA, 2011, (03) : 246 - 253
  • [28] The Effect of PP and Peroxide on the Properties and Morphology of HDPE and HDPE/PP Blends
    Gu, Jiaqi
    Xu, Haiyan
    Wu, Chifei
    ADVANCES IN POLYMER TECHNOLOGY, 2013, 32 (01)
  • [29] Morphology and Properties of PBT/SEBS and PBT/SEB-SG-MAH Blends
    Lu, Xiang
    Qu, Jinping
    PROCEEDINGS OF PPS-31: THE 31ST INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY, 2016, 1713
  • [30] Effect of organoclay and silane grafting of polyethylene on morphology, barrierity, and rheological properties of HDPE/PA6 blends
    Sharif-Pakdaman, Ali
    Morshedian, Jalil
    Jahani, Yousef
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 127 (02) : 1211 - 1220
12345