Fatigue design of spot-welded austenitic and duplex stainless sheet steels

The Fatigue strength of spot-welded stainless sheer. steels has been investigated. The main part of the fatigue tests was performed on a cold rolled austenitic stainless sheet steel (AISI304) in air at ambient temperature. For comparison, a duplex stainless steel (SAF2304) of similar yield strength as AISI304 was also incorporated into the test programme. Since the fatigue strength of spot-welded joints depends on the mode of loading, both shear-loaded and peel-loaded joints were tested. The fatigue strength of the spot-welded stainless steels was found to decrease with decreasing sheet thickness. Furthermore, the fatigue strength for peel-loaded joints is lower than that of shear-loaded joint for sheets of equal thickness. The local loading conditions at the weld edge have been analysed in terms of finite element calculations and fracture mechanics. A design parameter derived from a fracture mechanics analysis was defined for spot-welded stainless sheet steels. It was shown to predict the fatigue life of the present steels and joint configurations in a satisfactory way.