Thermal stability and corrosion behavior of Cu-Zr-Al-Y bulk metallic glass

被引:12
作者
Chen, S. F. [1 ]
Lin, S. L. [1 ]
Chen, J. K. [1 ]
Lin, Y. L. [1 ]
机构
[1] Natl Taipei Univ Technol, Inst Mat Sci & Engn, Taipei 106, Taiwan
关键词
Glasses; metallic; Glass-forming ability; Corrosion; MINOR ALLOYING ADDITIONS; MECHANICAL-PROPERTIES; FORMING ABILITY;
D O I
10.1016/j.intermet.2010.02.051
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this study, (Cu0.46Zr0.46Al0.08)(100-X)Y-X (0 <= X <= 8,in at.%) alloy ribbons and rods are prepared by single roller melt-spinning method and suction casting method. X-ray spectra show that the obtained alloy ribbons with X = 0, 2, 4, 8 and alloy rods with X = 0 and 4 at.% Y are fully amorphous. Amorphous rod of 4 at.% Y containing alloy up to 6 mm diameter can be achieved and has a large supercooled region (Delta T-X) up to 75 K. In contrast, alloy rods with either X = 2 or 8 at.% Y contain small amount of crystallites. In H2SO4 solution, the Cu-Zr-Al-Y metallic glass rods form uniform oxide films on surface and have corrosion rate of 0.051-0.073 mm/yr. Pitting occurs when the glass rods are immersed in 3% NaCl solution and sea water and the corrosion rate ranges from 0.194 to 0.286 mm/yr. In all solutions, the corrosion resistance of Cu-Zr-Al-Y bulk metallic glass outperforms 304 L stainless steel. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1954 / 1957
页数:4
相关论文
共 50 条
[41]   Fracture Behavior in Cu46.5Zr46.5Al7 and Cu46.5Zr41.5Al7Y5 Bulk Metallic Glasses [J].
Matteis, P. ;
Spena, P. Russo ;
Pozzi, C. ;
Baser, T. A. ;
Baricco, M. ;
Battezzati, L. ;
Firrao, D. ;
Castellero, A. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (07) :1767-1774
[42]   Effect of Chemical Bonding on the Thermal Stability of Cu-Zr-Rich Cu-Zr-Al Bulk Metallic Glasses [J].
Zhang, Ailong ;
Chen, Ding ;
Chen, Zhenhua ;
Long, Yongfu ;
Li, Yan ;
Wang, Shenghui ;
Ma, Lei ;
Zhang, Jingping .
PHYSICS OF METALS AND METALLOGRAPHY, 2019, 120 (07) :667-671
[43]   Enhancement of corrosion resistance in bulk metallic glass by ion implantation [J].
Jiang, Q. K. ;
Qin, C. L. ;
Amiya, K. ;
Nagata, S. ;
Inoue, A. ;
Zheng, R. T. ;
Cheng, G. A. ;
Nie, X. P. ;
Jiang, J. Z. .
INTERMETALLICS, 2008, 16 (02) :225-229
[44]   Failure behavior of Cu-Ti-Zr-based bulk metallic glass alloys [J].
El-Hadek, Medhat Awad ;
Kassem, Magdy .
JOURNAL OF MATERIALS SCIENCE, 2009, 44 (04) :1127-1136
[45]   Mechanical properties and thermal stability of a Cu-based bulk metallic glass microalloyed with silicon [J].
Tsai, Pei Hua ;
Lee, I. Sui ;
Jian, Sheng Rui ;
Jang, Jason Shian Ching .
JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2011, 34 (07) :917-923
[46]   Glass forming ability, thermal stability and elastic properties of Zr-Ti-Cu-Be-(Fe) bulk metallic glasses [J].
Zong, Haitao ;
Bian, Linyan ;
Cheng, Jingyun ;
Cao, Guohua ;
Kang, Chaoyang ;
Li, Ming .
Results in Physics, 2016, 6 :1157-1160
[47]   Liquid-liquid phase transition and chemical phase separation in Cu-Zr-Al-Y bulk glass-forming supercooled liquid [J].
Jiang, H. R. ;
Frey, M. ;
Neuber, N. ;
Wang, Q. ;
Lu, W. F. ;
Ruschel, L. M. ;
Sun, G. Y. ;
Gallino, I. ;
Zhang, B. ;
Wang, G. ;
Busch, R. ;
Shen, J. ;
Yang, Y. .
ACTA MATERIALIA, 2025, 293
[48]   Effect of yttrium addition on flow behavior of Cu-Zr-Al bulk metallic glass in the supercooled liquid region [J].
Yang Ke ;
Fan Xinhui ;
Li Bing ;
Li Yanhong ;
Wang Xin ;
Xu Xuanxuan .
JOURNAL OF RARE EARTHS, 2017, 35 (10) :1035-1041
[49]   Thermal stability and crystallisation of a Zr55Cu30Al10Ni5 bulk metallic glass studied by in situ ultrasonic echography [J].
Keryvin, V ;
Vaillant, ML ;
Rouxel, T ;
Huger, M ;
Gloriant, T ;
Kawamura, Y .
INTERMETALLICS, 2002, 10 (11-12) :1289-1296
[50]   Effect of Ag addition on the thermal stability and glass-forming ability of Zr35Ti30Cu7.5Be27.5 bulk metallic glass [J].
Zong HaiTao ;
Zhang XinYu ;
Li LiXin ;
Bian LinYan ;
Liang ShunXing ;
Tan ChunLin .
CHINESE SCIENCE BULLETIN, 2012, 57 (11) :1219-1222