Experimental study on pollutant emissions in the novel combined porous-free flame burner

被引：31

作者：

Ghorashi, Seyed Amin ^{[1
,2
]}

Hashemi, Seyed Abdomehdi ^{[1
,2
]}

Hashemi, Seyed Mohammad ^{[1
,2
]}

Mollamahdi, Mandi ^{[1
,2
]}

机构：

[1] Univ Kashan, Kashan 8731751167, Iran

[2] Univ Kashan, Energy Res Inst, Kashan, Iran

来源：

ENERGY | 2018年 / 162卷

关键词：

Experimental study; Porous-free flame burner; Porous burner; CO emission; NOx emission; PREMIXED COMBUSTION; METHANE/AIR; STABILIZATION; MEDIA;

D O I：

10.1016/j.energy.2018.08.005

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This study intends to measure the pollutant emissions in the novel combined porous-free flame burner and compare it with porous burner experimentally. In this regard, a comparison of the porous-free flame burner and porous burner is done and the effect of the diameter of the hole that is created at the center of the porous medium is studied. In the following, the effects of pore density of the porous medium, firing rate and porous medium material on pollutant emissions are analyzed. The results show that CO concentration in the porous-free flame burner is lower than that of the porous burner and that an increase in the central hole diameter leads to a decrease in CO emission. Furthermore, as the pore density of the porous medium increases, CO concentration increases and for a higher firing rate, CO emission decreases. Also, when the Al2O3 porous medium is used, CO concentration decreases compare to that of SiC porous medium. Measuring NOx emission shows that NOx concentration changes only with varying the equivalence ratio and other parameters have no significant effect on NOx emission. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：517 / 525

页数：9

共 32 条

[1] Experimental investigation of submerged flame in packed bed porous media burner fueled by low heating value producer gas [J].

Al-attab, K. A. ;

Ho, John Chung ;

Zainal, Z. A. .

EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2015, 62 :1-8

[2] Adiabatic premixed combustion in a gaseous fuel porous inert media under high pressure and temperature: Novel flame stabilization technique [J].

Bakry, Ayman ;

Al-Salaymeh, Ahmed ;

Al-Muhtaseb, Ala'a H. ;

Abu-Jrai, Ahmad ;

Trimis, D. .

FUEL, 2011, 90 (02) :647-658

[3] Numerical study of the effects of material properties on flame stabilization in a porous burner [J].

Barra, AJ ;

Diepvens, G ;

Ellzey, JL ;

Henneke, MR .

COMBUSTION AND FLAME, 2003, 134 (04) :369-379

[4] Premixed combustion on ceramic foam burners [J].

Bouma, PH ;

De Goey, LPH .

COMBUSTION AND FLAME, 1999, 119 (1-2) :133-143

[5] Numerical and experimental investigation of matrix-stabilized methane/air combustion in porous inert media [J].

Brenner, G ;

Pickenäcker, K ;

Pickenäcker, O ;

Trimis, D ;

Wawrzinek, K ;

Weber, T .

COMBUSTION AND FLAME, 2000, 123 (1-2) :201-213

[6] Simulations of premixed combustion in porous media [J].

Diamantis, DJ ;

Mastorakos, E ;

Goussis, DA .

COMBUSTION THEORY AND MODELLING, 2002, 6 (03) :383-411

[7] Methane/air premixed combustion in a two-layer porous burner with different foam materials [J].

Gao, H. B. ;

Qu, Z. G. ;

Feng, X. B. ;

Tao, W. Q. .

FUEL, 2014, 115 :154-161

[8]

Greenberg SJ., 2004, P ASME TURB EXP POW, V41669, P393, DOI 10.1115/GT2004-53629

[9]

Hashemi SA, 2018, P I MECH ENG J-J ENG

[10] THE EFFECT OF INLET CONDITION ON THE COMBUSTION IN A POROUS-FREE FLAME BURNER [J].

Hashemi, Seyed Abdolmehdi ;

Nikfar, Majid .

JOURNAL OF POROUS MEDIA, 2017, 20 (09) :823-839

← 1 2 3 4 →