EXPERIMENTALLY VALIDATED NUMERICAL ANALYSIS OF REINFORCED CONCRETE SLAB-COLUMN CONNECTIONS SUBJECTED TO PUNCHING SHEAR

被引：1

作者：

Florut, S. C. ^{[1
]}

Popescu, D. A. ^{[1
]}

Stoian, V ^{[1
]}

Dan, D. ^{[1
]}

Nagy-Gyorgy, T. ^{[1
]}

Todea, V ^{[1
]}

机构：

[1] Politehn Univ Timisoara, Fac Civil Engn, 2nd T Lalescu, Timisoara 300223, Romania

来源：

JOURNAL OF APPLIED ENGINEERING SCIENCES | 2020年 / 10卷 / 02期

关键词：

reinforced concrete; flat slabs; punching shear; strengthening; numerical modelling; FLAT SLABS; STRENGTH;

D O I：

10.2478/jaes-2020-0019

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The paper presents the results of experimental investigations and numerical analyses performed on reinforced concrete flat slabs. Two tests were carried out on two flat slab specimens designed without specific shear reinforcement. The present paper deals only with the experimental behaviour and numerical modelling of such slabs, this representing the initial part of a larger study which aims to evaluate the shear capacity of such deficient slabs resulted from faulty design or execution and to identify viable and efficient strengthening solutions. ATENA finite element software package was used to numerically model the behaviour of the specimens. A very good agreement was achieved between the results of experimental investigations and numerical modelling with deviations of 0.2% in terms of maximum load carrying capacity and of 7% in terms of corresponding displacement. The specimens were able to carry loads of more than 950kN, larger than those evaluated using designated Eurocodes, displaying a safety factor of 2.72.

引用

页码：125 / 132

页数：8

共 20 条

[1]

Alexander S.D. B., 1986, Structural Engineering Report, P95

[2]

Bartolac M, 2015, GRADEVINAR, V67, P771

[3]

Cervenka V., 2018, ATENA program documentation, Part 1: Theory

[4]

European Committee for Standardization, 2004, EN 1994-1-1

[5]

Furst A, 1997, J STRUCT ENG-ASCE, V123, P1102

[6] Lessons from the Sampoong department store collapse [J].

Gardner, NJ ;

Huh, J ;

Chung, L .

CEMENT & CONCRETE COMPOSITES, 2002, 24 (06) :523-529

[7]

Hussein A., 2012, INT CONCRETE ABSTRAC, P1

[8]

Kierdorf A., 2006, P 2 INT C CONSTRUCTI, P1793

[9]

Kinnunen S, 1960, T ROY I TECHNOL

[10]

Kunz J., 2008, TAILOR MADE CONCRETE, P679

← 1 2 →