Assessment of Mung Bean Quality Through Single Kernel Characterization

With significant interest in incorporating beans, lentils, and pulses as nutrient-rich healthy food sources into our diets, a reliable technique for their rapid and accurate quality evaluation is needed. The method of single kernel characterization to determine the physical properties (i.e., diameter, weight, moisture content, and hardness) of mung beans was assessed in this study. Two mung bean varieties were characterized using the single kernel characterization technique and the results were compared to traditional methods. It was observed that predicted bean weights were accurate to known laboratory measurements (R = 0.98, n = 200). Individual bean characterization was moderately (R = 0.58-0.7, n = 100) correlated in regard to the true diameter of mung beans. An evaluation on moisture content was performed after tempering the two bean varieties to four moisture levels and a good correlation was obtained with the oven drying method (R = 0.92, n = 24). Hardness values obtained by single kernel characterization were moderately correlated to maximum forces measured using an Instron universal testing system. However, a common relationship was observed between mung bean hardness and moisture content when using both methods. Compared to visual inspection, automated characterization of single beans is a superior technique to measure the geometrical and mechanical properties of mung beans in an industrial setup where high throughput is paramount.