Analytical and empirical modeling of top roller position for three-roller cylindrical bending of plates and its experimental verification

被引：60

作者：

Gandhi, A. H. ^{[1
]}

Raval, H. K. ^{[2
]}

机构：

[1] CK Pithawalla Coll Engn & Technol, Surat 395007, India

[2] SV Natl Inst Technol, Surat 395007, India

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2008年 / 197卷 / 1-3期

关键词：

roller bending; springback; analytical study; empirical modeling; uncertainty analysis;

D O I：

10.1016/j.jmatprotec.2007.06.033

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Reported work proposes an analytical and empirical model to estimate the top roller position explicitly as a function of desired (final) radius of curvature for three-roller cylindrical bending of plates, considering the contact point shift at the bottom roller plate interfaces. Effect of initial strain and change of material properties during deformation is neglected. Top roller positions for loaded radius of curvature are plotted for a certain set of data for center distance between bottom rollers and bottom roller radius. Applying the method of least square and method of differential correction to the generated data, a unified correlation is developed for the top roller position, which in turn is verified with the experiments, on a pyramid type three-roller plate-bending machine. Uncertainty analysis of the empirical correlation is reported using the McClintock's method. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：268 / 278

页数：11

共 18 条

[1]

DEVIS DS, 1962, NOMOGRAPHY EMPIRICAL

[2]

*DIN, 1987, 1016 DIN

[3]

DITTER GE, 1979, MECH BEHAV MAT TENSI, P329

[4]

Gandhi A. H., 2005, P INT C REC ADV MECH, P175

[5]

GANDHI AH, 2006, P INT MECH ENG C EXP

[6] MODELING OF ELASTIC-PLASTIC BENDING OF BEAMS USING A ROLLER BENDING MACHINE [J].

HANSEN, NE ;

JANNERUP, O .

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1979, 101 (03) :304-310

[7] A MODEL OF THE SEQUENTIAL BENDING PROCESS FOR MANUFACTURING SIMULATION [J].

HARDT, DE ;

CONSTANTINE, E ;

WRIGHT, A .

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1992, 114 (02) :181-187

[8] CLOSED-LOOP SHAPE CONTROL OF A ROLL-BENDING PROCESS [J].

HARDT, DE ;

ROBERTS, MA ;

STELSON, KA .

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1982, 104 (04) :317-322

[9]

Hosford WF, 1993, METAL FORMING MECH M

[10] MATHEMATICAL-MODELING OF THE INTERNAL BENDING MOMENT AT THE TOP ROLL CONTACT IN MULTIPASS 4-ROLL THIN-PLATE BENDING [J].

HUA, M ;

SANSOME, DH ;

BAINES, K .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 52 (2-4) :425-459

← 1 2 →