Formation of Ti2AlN by Solid-Gas Combustion Synthesis with AlN- and TiN-Diluted Samples in Nitrogen

被引：12

作者：

Yeh, Chun-Liang ^{[1
]}

Kuo, Chong-Wei ^{[1
]}

Wu, Fang-Shian ^{[2
]}

机构：

[1] Feng Chia Univ, Dept Aerosp & Syst Engn, Taichung 40724, Taiwan

[2] Da Yeh Univ, Dept Mech & Automat Engn, Changhua 51591, Taiwan

来源：

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2010年 / 7卷 / 06期

关键词：

HIGH-TEMPERATURE SYNTHESIS; LIQUID REACTION SYNTHESIS; TITANIUM NITRIDE; TI3ALC2; TI3SIC2; MICROSTRUCTURE; CR2ALC; POWDER; TA2ALC; SHS;

D O I：

10.1111/j.1744-7402.2010.02549.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Ti2AlN was prepared by a self-propagating high-temperature synthesis (SHS) in nitrogen at 0.45 and 0.79MPa. TiN and AlN were adopted as diluents in the Ti-Al powder compacts and their contents varied from 8.3 to 25 mol%. Formation of Ti2AlN along with intermediates like TiN, Ti3Al, and TiAl was identified. For the AlN-added samples, the degree of dilution at 11.7 mol% brought about the optimum formation up to 81.8% Ti2AlN in nitrogen of 0.79 MPa. When the sample was diluted with 20 mol% TiN, the SHS process yielded the highest percentage of Ti2AlN reaching 84.3% in nitrogen of 0.45 MPa.

引用

页码：730 / 737

页数：8

共 22 条

[21] On the formation of Ti2AlN MAX phase coatings and improvement in tool life by superimposing on tungsten carbide cutting tool for machining Ti-6Al-4V alloys [J].

Kumar, Aswani S. ;

Priyadarshini, B. Geetha ;

Jahaziel, Bibeye ;

Krishnaraj, V. .

JOURNAL OF MANUFACTURING PROCESSES, 2023, 107 :210-225

[22] Combustion synthesis of Ti2(Al,Sn)C solid solutions from Ti/Al/Sn/C samples with addition of TiC and Al4C3 [J].

Yeh, C. L. ;

Chiang, C. H. .

CERAMICS INTERNATIONAL, 2015, 41 (05) :6263-6268

← 1 2 3 →