Measurement and Analysis of Vibration in the Milling Process of Sintered Carbide Workpiece

被引：0
作者：
Jozwik, Jerzy [1 ]
Legutko, Stanislaw [2 ]
Pytka, Jaroslaw [1 ]
Michalowska, Joanna [3 ]
机构：
[1] Lublin Univ Technol, Fac Mech Engn, Lublin, Poland
[2] Poznan Univ Tech, Fac Mech Engn & Management, Poznan, Poland
[3] State Sch Higher Educ, Inst Tech Sci & Aviat, Chelm, Poland
来源：
2019 IEEE 6TH INTERNATIONAL WORKSHOP ON METROLOGY FOR AEROSPACE (METROAEROSPACE) | 2019年
关键词：
milling process; vibration; cutting; CNC machine tools; STEEL; PARAMETERS; NOISE;
D O I：
10.1109/metroaerospace.2019.8869629
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
This study aims at preliminary evaluation of vibration produced in the milling of sintered carbide with Fraisa's Sphero-CVD tool. The main objective of the work is to analyze selected qualitative and quantitative relationships between machining conditions and vibration parameters in the machining of sintered carbide grade T10MG. The effects of feed rate, depth of cut and width of cut on the above-mentioned functional relationships are examined. Experimental tests are carried out on a DMU65MonoBlock numerically controlled machine tool with the use of 3-axis accelerometers from PCB PIEZOELECTRONICS and the LMS SCADAS Mobile SCM 05 system from Siemens. The tests are performed in the steady-state machining conditions. Prior to milling, hardness of the tested material is determined. Hardness measurements of sintered carbide grade T10MG are made by the Vickers method. Results are analyzed with the LMS Test. Lab Signature Acquisition measurement system. Experimental results are discussed and presented in plots and tables.
引用
收藏
页码：376 / 380
页数：5
相关论文
共 17 条
  • [1] Jozwik J., 2016, MANUFACTURING TECHNO, V16, P113, DOI DOI 10.21062/UJEP/X.2016/A/1213-2489/MT/16/1/113
  • [2] Józwik J, 2018, IEEE METROL AEROSPAC, P398, DOI 10.1109/MetroAeroSpace.2018.8453508
  • [3] HS 6-5-2 STEEL SURFACE LAYER DEVELOPMENT IN CARBONITRIDING WITH ZEROFLOW METHOD
    Jozwik, Jerzy
    Dziedzic, Krzysztof
    Usydus, Ireneusz
    Raos, Pero
    Krolczyk, Grzegorz M.
    [J]. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2016, 23 (05): : 1405 - 1409
  • [4] DIAGNOSTIC OF CNC LATHE WITH QC 20 BALLBAR SYSTEM
    Jozwik, Jerzy
    Semotiuk, Leszek
    Kuric, Ivan
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2015, 9 (28): : 96 - 102
  • [5] ANGULAR POSITIONING ACCURACY OF ROTARY TABLE AND REPEATABILITY OF FIVE-AXIS MACHINING CENTRE DMU 65 MONOBLOCK
    Jozwik, Jerzy
    Czwarnowski, Marek
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2015, 9 (28) : 89 - 95
  • [6] Józwik J, 2010, EKSPLOAT NIEZAWODN, P10
  • [7] Krolczyk G, 2013, TEH VJESN, V20, P1077
  • [8] Legutko S, 2009, EKSPLOAT NIEZAWODN, P8
  • [9] Nonlinear Numerical Model of Friction Heating during Rotary Friction Welding
    Lukaszewicz, A.
    [J]. JOURNAL OF FRICTION AND WEAR, 2018, 39 (06) : 476 - 482
  • [10] Lukaszewicz A, 2009, SOLID STATE PHENOMEN, V147-149, P706
12