Thermal Analysis of Stirling Engine to Power Automotive Alternator Using Heat from Exhaust Gases

被引：17

作者：

Alfarawi, S. ^{[1
]}

Webb-Martin, M. ^{[2
]}

Mahmoud, S. ^{[1
]}

Al-Dadah, R. K. ^{[1
]}

机构：

[1] Univ Birmingham, Sch Mech Engn, Birmingham B15 2TT, W Midlands, England

[2] BAE Syst, London, England

来源：

INTERNATIONAL CONFERENCE ON APPLIED ENERGY, ICAE2014 | 2014年 / 61卷

关键词：

Stirling Engine; Power Automotive; Exhaust Gases;

D O I：

10.1016/j.egypro.2014.12.013

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

This paper investigates the development of small scale beta type Stirling engine to recover the exhaust heat from the main engine and to drive the alternator (decouple it from the main engine), thus providing the required electrical power for onboard devices. The ideal adiabatic model was used to predict the thermodynamic performance of the engine. CFD investigation was also carried out to optimise the heater and the cooler geometry of the Stirling engine. The results showed that it is possible to generate a power output of 1.5-2kWe at an ideal thermal efficiency of 40% and engine overall weight of 11-14kg. (c) 2014 The Authors. Published by Elsevier Ltd.

引用

页码：2395 / 2398

页数：4

共 50 条

[21] Thermal analysis of the ideal free-piston stirling engine model
Yang, Peng
Xing, Yuming
ADVANCES IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2, 2013, 614-615 : 228 - +
[22] Finite time thermodynamic evaluation of endoreversible Stirling heat engine at maximum power conditions
Tlili, Iskander
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2012, 16 (04) : 2234 - 2241
[23] Low Enthalpy Heat Stirling Engine Based Electric Power Generation: A Research Design
Gaynor, P. T.
Webb, R. Y.
Lloyd, C. C.
2009 INTERNATIONAL CONFERENCE ON CLEAN ELECTRICAL POWER (ICCEP 2009), VOLS 1 AND 2, 2009, : 615 - 618
[24] Investment risk for biomass integrated gasification combined heat and power unit with an internal combustion engine and a Stirling engine
Bartela, Lukasz
Kotowicz, Janusz
Dubiel-Jurgas, Klaudia
ENERGY, 2018, 150 : 601 - 616
[25] Feasibility analysis of power generation from landfill gas by using internal combustion engine, organic Rankine cycle and Stirling engine of pilot experiments in Thailand
Pawananont, Kanchit
Leephakpreeda, Thananchai
2017 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES, 2017, 138 : 575 - 579
[26] Adsorption purification of exhaust gases from ship power equipment
Turkin, Vladimir A.
Ignatenko, George V.
Belyaev, Vladimir V.
Zubko, Sergei S.
Kraevoy, Aleksey I.
MARINE INTELLECTUAL TECHNOLOGIES, 2024, (01): : 153 - 158
[27] Performance Analysis and Optimization of a Solar Powered Stirling Engine with Heat Transfer Considerations
Chen, Chieh-Li
Ho, Chia-En
Yau, Her-Terng
ENERGIES, 2012, 5 (09): : 3573 - 3585
[28] Heat transfer characteristics of the oscillating flows of different working gases in U-shaped tubes of a Stirling engine
Ni, Mingjiang
Shi, Bingwei
Xiao, Gang
Luo, Zhongyang
Cen, Kefa
APPLIED THERMAL ENGINEERING, 2015, 89 : 569 - 577
[29] Reducing the Toxicity of the Exhaust Gases from the Internal Combustion Engine by Using a Ceramic Coating on Components of the Combustion Chamber
Dudareva, N. Yu.
Sitdikov, V. M.
THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING, 2024, 58 (03) : 838 - 844
[30] Exhaust gases depletion using non-thermal plasma (NTP)
Adnan, Zulfam
Mir, Sadullah
Habib, Mudassar
ATMOSPHERIC POLLUTION RESEARCH, 2017, 8 (02) : 338 - 343

← 1 2 3 4 5 →