Effects of Substrate Temperature on the Corrosion Behaviour of Nanochromium Coatings Deposited by Direct Current Magnetron Sputtering

被引：4
|
作者：
Ren, Yanjie [1 ]
Chen, Jian [1 ]
Chen, Yaqing [1 ]
Chen, Jianlin [1 ]
Qiu, Wei [1 ]
机构：
[1] Changsha Univ Sci & Technol, Dept Energy & Power Engn, Changsha 410076, Hunan, Peoples R China
来源：
JOURNAL OF NANOMATERIALS | 2016年 / 2016卷
基金：
中国国家自然科学基金;
关键词：
PEM FUEL-CELL; STAINLESS-STEEL; BIPOLAR PLATES; FILMS; POLYPYRROLE; GROWTH;
D O I：
10.1155/2016/4894062
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Nanochromium coatings were deposited on 316L stainless steel bipolar plates of a proton-exchange membrane fuel cell (PEMFC) by a direct current magnetron sputtering technique. The effect of substrate temperature on the corrosion resistance of nanochromium coatings was investigated. The corrosion performance of the bare and chromium-coated steel in a simulated environment of PEMFC (0.5M H2SO4 + 2 ppm F-) was studied using electrochemical impedance spectroscopy, polarisation, and open circuit potential measurements. The results showed that the corrosion rates of two nanochromium coatings deposited at 300 degrees C and 500 degrees C were lower than those of uncoated steel by more than one order of magnitude. Electrochemical impedance spectra of both nanochromium coatings exhibited distinct characteristics in corrosive solution. The nanochromium coating deposited at 500 degrees C showed superior stability in the corrosive solution.
引用
收藏
页数：7
相关论文
共 50 条
  • [41] Mechanical properties of titanium nitride coatings deposited by inductively coupled plasma assisted direct current magnetron sputtering
    Lim, JW
    Park, HS
    Park, TH
    Lee, JJ
    Joo, J
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 2000, 18 (02): : 524 - 528
  • [42] Enhanced hardness of CrAlSiN/W2N superlattice coatings deposited by direct current magnetron sputtering
    Tsai, Y. Z.
    Duh, J. G.
    JOURNAL OF MATERIALS RESEARCH, 2010, 25 (12) : 2325 - 2329
  • [43] Apatite Coatings Deposited by DC Magnetron Sputtering
    Briois, P.
    Mazataud, C.
    Fourcade, S.
    Mauvy, F.
    Grenier, J-C
    Billard, A.
    SOLID OXIDE FUEL CELLS 12 (SOFC XII), 2011, 35 (01): : 1275 - 1282
  • [44] Broadband antireflection coatings deposited by magnetron sputtering
    WANG Minglj
    ChineseScienceBulletin, 1997, (19) : 1612 - 1615
  • [45] Characteristics of GaTiZnO coatings deposited by magnetron sputtering
    Lu, Zhou
    Guo, Sheng Yan
    Xie, Quan
    SURFACE ENGINEERING, 2024, 40 (11-12) : 1079 - 1087
  • [46] Broadband antireflection coatings deposited by magnetron sputtering
    Wang, ML
    Gong, H
    Fan, ZX
    CHINESE SCIENCE BULLETIN, 1997, 42 (19): : 1612 - 1615
  • [47] SiC coatings deposited by RF magnetron sputtering
    Tang, HD
    Tan, SH
    Huang, ZR
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1309 - 1312
  • [48] Mechanical, tribological and corrosion properties of CrBN films deposited by combined direct current and radio frequency magnetron sputtering
    Jahodova, Vera
    Ding, Xing-zhao
    Seng, Debbie H. L.
    Gulbinski, W.
    Louda, P.
    THIN SOLID FILMS, 2013, 544 : 335 - 340
  • [49] The effect of DC magnetron sputtering AlN coatings on the corrosion behaviour of magnesium alloys
    Altun, H
    Sen, S
    SURFACE & COATINGS TECHNOLOGY, 2005, 197 (2-3): : 193 - 200
  • [50] Corrosion behaviors of Cr-Al-N coatings deposited by reactive magnetron sputtering
    Duo Shu-wang
    Zhu Ming
    Liu Ting-zhi
    Li Zhong-jun
    Wang Peng
    Li Mei-shuan
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 : S841 - S846
12345