Effect of Be on aging behavior of an Al-Si-Cu-Mg cast alloy

被引：10
|
作者：
Wang, GQ [1 ]
Bian, XF [1 ]
Qiao, JG [1 ]
Zhang, JY [1 ]
机构：
[1] Shandong Univ, Key Lab Liquid Struct & Hered Mat, Minist Educ, Jinan 250061, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2004年 / 13卷 / 01期
基金：
中国国家自然科学基金;
关键词：
aging behavior; aluminum alloy; effect of Be; nucleation density; precipitates;
D O I：
10.1361/10599490417605
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of Be addition on the aging behavior of UNS 03370 (Al11Si3Cu0.3Mg) was investigated by micro-hardness measurement, differential scanning calorimetry (DSC) and transmission electron microscope (TEM) analysis. Age hardening analysis shows Be additions to an Al11Si3Cu0.3Mg alloy accelerates the age hardening rate and increases the peak hardness by 15 HV during aging at 160 degreesC. DSC shows that Be additions lead to an endothermic peak corresponding to the dissolution of Gunier Preston zones (GP I) disappear with exothermic peaks corresponding to precipitation of GP II zones and the lambda' and/or theta' phases shift to low temperature. DSC and TEM analyses show that GP II zones are more effective than V and/or theta' on hardening the alloy, and Be addition increases the homogeneous nucleation density of GP II zones. The possible Be atoms participating in the precipitation process during aging and the high Be-vacancy binding energy can explain the effect of Be on aging behavior of Al11Si3Cu0.3Mg alloy.
引用
收藏
页码：99 / 102
页数：4
相关论文
共 50 条
  • [21] Precipitation-hardening in cast AL-Si-Cu-Mg alloys
    Tavitas-Medrano, F. J.
    Mohamed, A. M. A.
    Gruzleski, J. E.
    Samuel, F. H.
    Doty, H. W.
    JOURNAL OF MATERIALS SCIENCE, 2010, 45 (03) : 641 - 651
  • [22] Effect of cooling rate and eutectic modification on texture and grain structure of Al-Si-Cu-Mg die cast alloy
    Zamani, M.
    Seifeddine, S.
    Ghassemali, E.
    METALLURGIA ITALIANA, 2016, (06): : 29 - 32
  • [23] Thermo-mechanical fatigue behavior of Al-Si-Cu-Mg casting alloy
    Ikuno, H
    Iwanaga, S
    Awano, Y
    THERMO-MECHANICAL FATIGUE BEHAVIOR OF MATERIALS, 3RD VOL, 2000, 1371 : 138 - 149
  • [24] Monotonic and cyclic deformation behavior of the Al-Si-Cu-Mg cast alloy with micro-additions of Ti, V and Zr
    Shaha, S. K.
    Czerwinski, F.
    Kasprzak, W.
    Friedman, J.
    Chen, D. L.
    INTERNATIONAL JOURNAL OF FATIGUE, 2015, 70 : 383 - 394
  • [25] Effect of Cu on the Creep Behavior of Cast Al-15Si-0.5Mg Alloy
    Seyyed Mehdi Miresmaeili
    Bahram Nami
    Reza Abbasi
    Iraj Khoubrou
    JOM, 2019, 71 : 2128 - 2135
  • [26] Effect of Cu on the Creep Behavior of Cast Al-15Si-0.5Mg Alloy
    Miresmaeili, Seyyed Mehdi
    Nami, Bahram
    Abbasi, Reza
    Khoubrou, Iraj
    JOM, 2019, 71 (06) : 2128 - 2135
  • [27] Optimization of Heat Treatment Process of Al-Si-Cu-Mg Cast Alloy Based on CALPHAD Calculation
    Zhang M.
    Tian Y.
    Zheng X.
    Zhang Y.
    Wang J.
    Chen L.
    Cailiao Daobao/Materials Reports, 2023, 37 (22):
  • [28] Effect of Strain Level on the Behavior of Intermetallics and Texture of Al-Si-Cu-Mg Alloy Modified with Transition Metals
    Shaha, Sugrib K.
    Czerwinski, Frank
    Kasprzak, Wojciech
    Friedman, Jacob
    Chen, Daolun
    Friedman, Jacob
    Chen, Daolun
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2015, 8 (03) : 731 - 735
  • [29] The effect of quenching rates on microstructure and mechanical properties of an Al-Si-Cu-Mg alloy
    Piao, Yi-Nan
    Jia, Hai-Long
    Zha, Min
    Ma, Pin-Kui
    Gao, Dan
    Yin, Chao-Ran
    Yang, Zhi-Zheng
    Wang, Hui-Yuan
    MATERIALS CHARACTERIZATION, 2023, 196
  • [30] The Effect of Thixoforming Process on The Microstructures and Mechanical Properties of Al-Si-Cu-Mg Alloy
    Samat, Saziana
    Omar, Mohd Zaidi
    Mohamed, Intan Fadhlina
    Aziz, Ahmad Muhammad
    JURNAL KEJURUTERAAN, 2018, 1 (06): : 1 - 7
12345