A thermosyphon heat pipe cooler for high power LEDs cooling

被引：23
|
作者：
Li, Ji [1 ]
Tian, Wenkai [1 ]
Lv, Lucang [1 ]
机构：
[1] Univ Chinese Acad Sci, Coll Phys, Lab Adv Thermal Management Technol, 19A Yu Quan Lu Rd, Beijing 100049, Peoples R China
来源：
HEAT AND MASS TRANSFER | 2016年 / 52卷 / 08期
基金：
中国国家自然科学基金;
关键词：
2-PHASE CLOSED THERMOSIPHON;
D O I：
10.1007/s00231-015-1679-z
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Light emitting diode (LED) cooling is facing the challenge of high heat flux more seriously with the increase of input power and diode density. The proposed unique thermosyphon heat pipe heat sink is particularly suitable for cooling of high power density LED chips and other electronics, which has a heat dissipation potential of up to 280 W within an area of 20 mm x 22 mm (> 60 W/cm(2)) under natural air convection. Meanwhile, a thorough visualization investigation was carried out to explore the two phase flow characteristics in the proposed thermosyphon heat pipe. Implementing this novel thermosyphon heat pipe heat sink in the cooling of a commercial 100 W LED integrated chip, a very low apparent thermal resistance of 0.34 K/W was obtained under natural air convection with the aid of the enhanced boiling heat transfer at the evaporation side and the enhanced natural air convection at the condensation side.
引用
收藏
页码：1541 / 1548
页数：8
相关论文
共 50 条
  • [41] Experimental Study of Heat Pipe Exchanger for High Power LED Cooling System
    Gou, Yujun
    Liu, Zhongliang
    Zhong, Xiaohui
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3, 2011, 295-297 : 1985 - +
  • [42] Fan vs. Passive Heat Sink with Heat Pipe in Cooling of High Power LED
    Badalan , N.
    Svasta, P.
    2017 IEEE 23RD INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY IN ELECTRONIC PACKAGING (SIITME), 2017, : 296 - 299
  • [43] Study on Thermosyphon for Shipboard High Power Electronics Cooling System
    Liu, Qiusheng
    Fukuda, Katsuya
    Sutopo, Purwono F.
    PROCEEDINGS OF ISHTEC2012, 4TH INTERNATIONAL SYMPOSIUM ON HEAT TRANSFER AND ENERGY CONSERVATION, 2011, : 134 - 138
  • [44] Seasonal cooling load reduction of building by thermosyphon heat pipe radiator in different climate areas
    Chotivisarut, Nammont
    Nuntaphan, Atipoang
    Kiatsiriroat, Tanongkiat
    RENEWABLE ENERGY, 2012, 38 (01) : 188 - 194
  • [45] REMOVING THE HOT-SPOTS IN HIGH POWER DEVICES USING THE THERMOELECTRIC COOLER AND MICRO HEAT PIPE
    Hirachan, Agat
    Agonafer, Dereje
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 9, PTS A AND B, 2013, : 1189 - 1195
  • [46] GAS COOLER WITH REDUCED PIPE TO PIPE HEAT CONDUCTION
    Heerup, C.
    Borup, R.
    13TH IIR GUSTAV LORENTZEN CONFERENCE ON NATURAL REFRIGERANTS: NATURAL REFRIGERANT SOLUTIONS FOR WARM CLIMATE COUNTRIES, 2018, : 905 - 911
  • [47] A novel heat pipe/ejector cooler
    Riffat, SB
    Holt, A
    APPLIED THERMAL ENGINEERING, 1998, 18 (3-4) : 93 - 101
  • [48] Direct Submount Cooling of High-Power LEDs
    Kim, Dae-Whan
    Rahim, Emil
    Bar-Cohen, Avram
    Han, Bongtae
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2010, 33 (04): : 698 - 712
  • [49] Developing the Coaxial Dual-Pipe Heat Pipe for Applications on Heat Pipe Cooler
    Ting, Chen-Ching
    Chen, Chien-Chih
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2011, 133 (09):
  • [50] DEVELOPING THE COAXIAL DUAL-PIPE HEAT PIPE FOR APPLICATIONS OF HEAT PIPE COOLER
    Chen, Chien-Chih
    Ting, Chen-Ching
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 7, PTS A AND B, 2012, : 1505 - 1512
12345