Microstructure and Mechanical Properties of Weld in High Strength Low Alloy Steel by Ultra-Narrow Gap Welding

被引：2

作者：

Zhao, Li ^{[1
]}

Zhao, Xuan ^{[1
]}

机构：

[1] Wuhan Univ, Sch Power & Mech Engn, Wuhan 430072, Peoples R China

来源：

MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2 | 2011年 / 154-155卷

关键词：

ultra-narrow gap welding; high strength low alloy steel; microstructure; mechanical properties;

D O I：

10.4028/www.scientific.net/AMR.154-155.1792

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

HITEN610U2, high strength low alloy steel, was welded by ultra-narrow gap welding Observed by optical metalloscope, there were large majority of columnar crystal in weld an equiaxial crystal was the weld cross-section of 12.6%. Each weld could be compartmentalized into( original microstructure zone, over heated zone and normalizing zone under next weld thermal cycle in which the microstructures were almost the same. Through quantificational metallographic analysis, it was found there was more than 92.2% of acicular ferrite in weld metal, and other microstructures were fine. Mechanical test indicated that the strength of weld metal was higher than body material, and had outstanding plasticity.

引用

页码：1792 / +

页数：2

共 50 条

[41] Development of surface coatings for high-strength low alloy steel filler wires and their effect on the weld metal microstructure and properties [J].

Gehling, T. ;

Treutler, K. ;

Wesling, V. .

WELDING IN THE WORLD, 2021, 65 (08) :1591-1597

[42] Development of surface coatings for high-strength low alloy steel filler wires and their effect on the weld metal microstructure and properties [J].

T. Gehling ;

K. Treutler ;

V. Wesling .

Welding in the World, 2021, 65 :1591-1597

[43] EFFECT OF HEAT TREATMENT ON MECHANICAL PROPERTIES AND MICROSTRUCTURE MORPHOLOGY OF LOW-ALLOY HIGH-STRENGTH STEEL [J].

Bolanowski, K. .

ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (02) :475-480

[44] Effect of Tempering on Mechanical Properties and Microstructure of a High-Strength Low-Alloy Steel [J].

Z. Janjušević ;

Z. Gulišija ;

M. Mihailović ;

A. Patarić .

Metal Science and Heat Treatment, 2014, 56 :81-83

[45] Variations in microstructure and mechanical properties along thickness direction in a heavy high strength low alloy steel plate [J].

Cui, Shu-gang ;

Gu, Guo-chao ;

Shi, Chang-xin ;

Xiao, Gui-yong ;

Lu, Yu-peng .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 :9190-9202

[46] Wire and Arc Additive Manufacturing of High-Strength Low-Alloy Steel: Microstructure and Mechanical Properties [J].

Duarte, Valdemar R. ;

Rodrigues, Tiago A. ;

Schell, Norbert ;

Santos, Telmo G. ;

Oliveira, Joao P. ;

Miranda, Rosa M. .

ADVANCED ENGINEERING MATERIALS, 2021, 23 (11)

[47] Effect of Tempering on Mechanical Properties and Microstructure of a High-Strength Low-Alloy Steel [J].

Janjusevic, Z. ;

Gulisija, Z. ;

Mihailovic, M. ;

Pataric, A. .

METAL SCIENCE AND HEAT TREATMENT, 2014, 56 (1-2) :81-83

[48] Effect of Rapid Heating and Quenching on Microstructure and Mechanical Properties of High Strength Low Alloy Steel [J].

Zhu, Kangfeng ;

Wang, Xinwei ;

Wang, Zhenqiang ;

Tong, Shuai ;

Liang, Xiaokai ;

Sun, Xinjun ;

Yang, Caifu .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,

[49] Microstructure and Mechanical Properties for the Dissimilar Joining of Inconel 718 Alloy to High-Strength Steel by TIG Welding [J].

M. Anuradha ;

Vemulapalli Chittaranjan Das ;

P. Susila ;

Muralimohan Cheepu ;

D. Venkateswarlu .

Transactions of the Indian Institute of Metals, 2020, 73 :1521-1525

[50] Microstructure and Mechanical Properties for the Dissimilar Joining of Inconel 718 Alloy to High-Strength Steel by TIG Welding [J].

Anuradha, M. ;

Das, Vemulapalli Chittaranjan ;

Susila, P. ;

Cheepu, Muralimohan ;

Venkateswarlu, D. .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (06) :1521-1525

← 1 2 3 4 5 →