Microstructure and Mechanical Properties of Weld in High Strength Low Alloy Steel by Ultra-Narrow Gap Welding

被引：2

作者：

Zhao, Li ^{[1
]}

Zhao, Xuan ^{[1
]}

机构：

[1] Wuhan Univ, Sch Power & Mech Engn, Wuhan 430072, Peoples R China

来源：

MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2 | 2011年 / 154-155卷

关键词：

ultra-narrow gap welding; high strength low alloy steel; microstructure; mechanical properties;

D O I：

10.4028/www.scientific.net/AMR.154-155.1792

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

HITEN610U2, high strength low alloy steel, was welded by ultra-narrow gap welding Observed by optical metalloscope, there were large majority of columnar crystal in weld an equiaxial crystal was the weld cross-section of 12.6%. Each weld could be compartmentalized into( original microstructure zone, over heated zone and normalizing zone under next weld thermal cycle in which the microstructures were almost the same. Through quantificational metallographic analysis, it was found there was more than 92.2% of acicular ferrite in weld metal, and other microstructures were fine. Mechanical test indicated that the strength of weld metal was higher than body material, and had outstanding plasticity.

引用

页码：1792 / +

页数：2

共 50 条

[31] Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steel [J].

Jing Wang Minxu Lu Lei Zhang Wei Chang Lining Xu and Lihua Hu Institute for Advanced Materials and Technology University of Science and Technology Beijing Beijing China Research Institute of China National Offshore Oil Corporation Beijing China .

International Journal of Minerals Metallurgy and Materials, 2012, 19 (06) :518-524

[32] Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steel [J].

Jing Wang ;

Min-xu Lu ;

Lei Zhang ;

Wei Chang ;

Li-ning Xu ;

Li-hua Hu .

International Journal of Minerals, Metallurgy, and Materials, 2012, 19 :518-524

[33] Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections [J].

Javidan, Fatemeh ;

Heidarpour, Amin ;

Zhao, Xiao-Ling ;

Hutchinson, Christopher R. ;

Minkkinen, Jussi .

ENGINEERING STRUCTURES, 2016, 118 :16-27

[34] Development of ultra-narrow gap welding with constrained arc by flux band [J].

朱亮 ;

郑韶先 ;

陈剑虹 .

China Welding, 2006, (02) :44-49

[35] Friction stir welding of ultra low carbon steel: microstructure, mechanical properties and electrochemical study [J].

Koley, Ishita ;

Kundu, Sukumar ;

Kailas, Satish, V .

METALLURGICAL RESEARCH & TECHNOLOGY, 2019, 116 (01)

[36] Influence of austenization temperature on microstructure and mechanical properties of a new ultra-high strength low alloyed steel [J].

Feng, Ya-Ya ;

Xu, Chi ;

Su, Xiang ;

Sun, Yu-Lin ;

Pan, Xi ;

Cao, Yue-De ;

Chen, Guang .

MATERIALS TESTING, 2017, 59 (11-12) :990-996

[37] Interaction mechanism of flux band and arc in ultra-narrow gap welding [J].

Gong L. ;

Zhu L. ;

Zhang A. ;

Zhou H. .

Hanjie Xuebao/Transactions of the China Welding Institution, 2017, 38 (12) :57-60

[38] Effect of heat input on microstructure and mechanical properties of dissimilar joints between super duplex stainless steel and high strength low alloy steel [J].

Sadeghian, M. ;

Shamanian, M. ;

Shafyei, A. .

MATERIALS & DESIGN, 2014, 60 :678-684

[39] Influence of Chemical Composition and Post Welding Heat Treatment on the Microstructure and Mechanical Properties of High Strength Steel Weld Metals [J].

Mendes Gomes, Antonio Jose ;

Ferreira Jorge, Jorge Carlos ;

Guimaraes de Souza, Luis Felipe ;

Bott, Ivani de Souza .

FUNCTIONAL AND STRUCTURAL MATERIALS II, 2013, 758 :21-+

[40] Study of Process, Microstructure, and Properties of Double-Wire Narrow-Gap Gas Metal Arc Welding Low-Alloy Steel [J].

Xiao, Ning ;

Kong, Haoyu ;

Sun, Qingjie ;

Ma, Ninshu .

MATERIALS, 2024, 17 (24)

← 1 2 3 4 5 →