Verification and validation of impinging round jet simulations using an adaptive FEM

This paper illustrates the use of an adaptive finite element method as a means of achieving verification of codes and simulations of impinging round jets, that is obtaining numerical predictions with controlled accuracy. Validation of these grid-independent solution is then performed by comparing predictions to measurements. We adopt the standard and accepted definitions of verification and validation (Technical Report AIAA-G-077-1998, American Institute of Aeronautics and Astronautics, 1998; Verification and Validation in Computational Science and Engineering. Hermosa Publishers: Albuquerque, NM, 1998). Mesh adaptation is used to perfonn the systematic and rigorous grid refinement studies required for both verification and validation in CFD. This ensures that discrepancies observed between predictions and measurements are due to deficiencies in the mathematical model of the flow. Issues in verification and validation are discussed. The paper presents an example of code verification by the method of manufactured solution. Examples of successful and unsuccessful validation for laminar and turbulent impinging jets show that agreement with experiments is achieved only with a good mathematical model of the flow physics combined with accurate numerical solution of the differential equations. The paper emphasizes good CFD practice to systematically achieve verification so that validation studies are always performed on solid grounds. Copyright (C) 2004 John Wiley Sons, Ltd.