A new design of type IV digital differentiators based on maximal linearity constraints applied at ω = π/2

Maximal linear FIR digital differentiators are preferred over others, like minimax designs, for narrow band applications. Most of the existing maximally linear designs achieve maximal linearity at zero frequency, and relatively lower attention has been given to the designs accurate in mid and higher frequency bands. Moreover, the existing maximally linear designs, with few exceptions, are type 111 filters, which are accurate in very narrow frequency bands. We present a type IV design accurate for midband frequencies, by forcing the maximal linearity constraints at half of the Nyquist frequency. The design problem is formulated as the solution of a system of linear equations, obtained by imposing maximal linearity constraints to the general frequency response of the filter. Certain special characteristics of the determinant of the coefficients matrix of these equations care explored and used in derivation of the explicit formulas for the impulse response coefficients. It is,shown that the design is accurate in much wider band as compared to its type Ill counterpart.