Cohesive zone model for high-cycle fatigue of composite bonded joints under mixed-mode I plus II loading

被引：33

作者：

de Moura, M. F. S. F. ^{[1
]}

Goncalves, J. P. M. ^{[2
]}

机构：

[1] Univ Porto, Fac Engn, Dept Engn Mecan, P-4200465 Oporto, Portugal

[2] IBM TJ Watson Res Ctr, Yorktown Hts, NY 10598 USA

来源：

ENGINEERING FRACTURE MECHANICS | 2015年 / 140卷

关键词：

Cohesive zone model; High-cycle fatigue; Adhesively bonded joints; Mixed-mode I plus II loading; SLB test; FATIGUE/FRACTURE CHARACTERIZATION; NUMERICAL SIMULATIONS; DRIVEN DELAMINATION; ELEMENT-ANALYSIS; CRACK-GROWTH; DAMAGE MODEL; PREDICTION;

D O I：

10.1016/j.engfracmech.2015.03.044

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

A cohesive zone model to deal with high-cycle fatigue of composite bonded joints under mixed-mode I+II loading is developed. The model assumes a linear traction-relative displacements softening and uses a single parameter to simulate the cumulative damage resulting from static and fatigue loading. Finite element analyses considering the Single-Leg Bending test were conducted to verify the performance of the proposed method under different modified Paris laws and load ratios. It was verified that the model is able to capture all those effects with accuracy which proves the adequacy of the whole procedure concerning mixed-mode I+II fatigue/fracture characterization of composite bonded joints. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：31 / 42

页数：12

共 50 条

[41] A Rate-Dependent Cohesive Zone Model for Adhesively Bonded Joints Loaded in Mode I
Marzi, S.
Hesebeck, O.
Brede, M.
Kleiner, F.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2009, 23 (06) : 881 - 898
[42] A Direct Method for the Assessment of Cohesive Zone Models for Thin Adhesive Layers Loaded in Mode I, Mode II, and Mixed-Mode I/II
Paroissien, E.
Lachaud, F.
Morlier, J.
Schwartz, S.
REVIEWS OF ADHESION AND ADHESIVES, 2020, 8 (02): : 1 - 31
[43] A procedure for the simulation of fatigue crack growth in adhesively bonded joints based on the cohesive zone model and different mixed-mode propagation criteria (vol 78, pg 1808, 2011)
Moroni, F.
Pirondi, A.
ENGINEERING FRACTURE MECHANICS, 2012, 89 : 128 - 138
[44] A thermo-mechanical cyclic cohesive zone model for variable amplitude loading and mixed-mode behavior
Springer, M.
Turon, A.
Pettermann, H. E.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2019, 159 : 257 - 271
[45] Cohesive zone model based analytical solutions for adhesively bonded pipe joints under torsional loading
Ouyang, Zhenyu
Li, Guoqiang
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (05) : 1205 - 1217
[46] Experimental characterization and cyclic cohesive zone modeling of mode I delamination growth in glass/epoxy composite laminates under high cycle fatigue
Teimouri, Farhad
Heidari-Rarani, Mohammad
Aboutalebi, Farhad Haji
Karimi, Saeid
Lessard, Larry
ENGINEERING FRACTURE MECHANICS, 2024, 296
[47] Mixed-mode (I plus II) fatigue crack growth of marine steels in Arctic environments
Qiao, Kaiqing
Liu, Zhijie
Guo, Qiuyu
Wang, Xiaobang
Zhang, Shengwei
OCEAN ENGINEERING, 2024, 310
[48] Experimental and numerical study of the delamination of Ceiba plywood under mode I, mode II and mixed-mode (I plus II) loading using the DCB, ELS and MMF tests
El Moustaphaoui, Anouar
Chouaf, Abdelkarim
Kimakh, Khadija
INTERNATIONAL JOURNAL OF FRACTURE, 2021, 231 (01) : 1 - 20
[49] A cohesive zone model for predicting the initiation of Mode II delamination in composites under cyclic loading
Rafiee, Roham
Sotoudeh, Sina
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2021, 40 (5-6) : 179 - 192
[50] Equivalent Crack, Fracture Size Effect, and Cohesive Stress Zone of Plain Concrete under Quasi-Static and Variable High-Cycle Fatigue Loading
Brake, Nicholas Andres
Chatti, Karim
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2017, 29 (04)

← 1 2 3 4 5 →