Cohesive zone model for high-cycle fatigue of composite bonded joints under mixed-mode I plus II loading

被引：33
作者：
de Moura, M. F. S. F. [1 ]
Goncalves, J. P. M. [2 ]
机构：
[1] Univ Porto, Fac Engn, Dept Engn Mecan, P-4200465 Oporto, Portugal
[2] IBM TJ Watson Res Ctr, Yorktown Hts, NY 10598 USA
来源：
ENGINEERING FRACTURE MECHANICS | 2015年 / 140卷
关键词：
Cohesive zone model; High-cycle fatigue; Adhesively bonded joints; Mixed-mode I plus II loading; SLB test; FATIGUE/FRACTURE CHARACTERIZATION; NUMERICAL SIMULATIONS; DRIVEN DELAMINATION; ELEMENT-ANALYSIS; CRACK-GROWTH; DAMAGE MODEL; PREDICTION;
D O I：
10.1016/j.engfracmech.2015.03.044
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A cohesive zone model to deal with high-cycle fatigue of composite bonded joints under mixed-mode I+II loading is developed. The model assumes a linear traction-relative displacements softening and uses a single parameter to simulate the cumulative damage resulting from static and fatigue loading. Finite element analyses considering the Single-Leg Bending test were conducted to verify the performance of the proposed method under different modified Paris laws and load ratios. It was verified that the model is able to capture all those effects with accuracy which proves the adequacy of the whole procedure concerning mixed-mode I+II fatigue/fracture characterization of composite bonded joints. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：31 / 42
页数：12
相关论文
共 50 条
  • [31] Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading
    Daneshjoo, Zahra
    Shokrieh, Mahmood M.
    Fakoor, Mahdi
    Alderliesten, Rene
    Zarouchas, Dimitrios
    ENGINEERING FRACTURE MECHANICS, 2019, 211 : 82 - 98
  • [32] Prediction of Cohesive Zone Length and Accurate Numerical Simulation of Delamination under Mixed-mode Loading
    Chetan H. C.
    Subhaschandra Kattimani
    S. M. Murigendrappa
    Applied Composite Materials, 2021, 28 : 1861 - 1898
  • [33] Prediction of Cohesive Zone Length and Accurate Numerical Simulation of Delamination under Mixed-mode Loading
    Chetan, H. C.
    Kattimani, Subhaschandra
    Murigendrappa, S. M.
    APPLIED COMPOSITE MATERIALS, 2021, 28 (06) : 1861 - 1898
  • [34] A hysteresis cohesive approach for predicting mixed-mode delamination onset of composite laminates under cyclic loading: Part I, model development
    Rafiee, Roham
    Sotoudeh, Sina
    COMPOSITE STRUCTURES, 2021, 277
  • [35] Adhesive bond characterization under mixed-mode I plus II loading using the mmb test
    Arrese, Ainhoa
    Mujika, Faustino
    Renart, Jordi
    Sarrado, Carlos
    ENGINEERING FRACTURE MECHANICS, 2025, 318
  • [36] Mixed-mode fracture of adhesively bonded metallic joints under quasi-static loading
    Hafiz, T. A.
    Wahab, M. M. Abdel
    Crocombe, A. D.
    Smith, P. A.
    ENGINEERING FRACTURE MECHANICS, 2010, 77 (17) : 3434 - 3445
  • [37] Experimental characterization of cohesive zone models for thin adhesive layers loaded in mode I, mode II, and mixed-mode I/II by the use of a direct method
    Lelias, G.
    Paroissien, E.
    Lachaud, E.
    Morlier, J.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2019, 158 : 90 - 115
  • [38] A numerical framework for simulating progressive failure in composite laminates under high-cycle fatigue loading
    Hofman, P.
    van der Meer, F. P.
    Sluys, L. J.
    ENGINEERING FRACTURE MECHANICS, 2024, 295
  • [39] A plastic-damage cohesive zone model for shear rupture band in geomaterials under mixed-mode and cyclic loading
    Miao, Xiao
    Ling, Daosheng
    Pan, Anhao
    Wang, Hai
    COMPUTERS AND GEOTECHNICS, 2025, 177
  • [40] Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness
    Turon, A.
    Gonzalez, E. V.
    Sarrado, C.
    Guillamet, G.
    Maimi, P.
    COMPOSITE STRUCTURES, 2018, 184 : 506 - 511
12345